Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
I noticed today there is only one post. So here is my work. Fun little blocks.
-
Please inform if there are any instructions for the outer border . It uses the template B from the Centre block, but what...
-
Your color choices are great, and your quilting is beautifully done.
-
Beautiful work Helen!
-
This is absolutely beautiful! Congrats on a wonderful job!
-
Finished quilting yesterday! This was my first time to use spray baste. I sprayed each layer outside and then assembled...
-
So Sorry! I accidentally deleted my last post trying to edit and re-add a smaller photo so it would show up, which also...
-
Hi Barbara, I’m just wondering if the running stitch around the appliqué flowers stitched prior to quilting or is it...
-
I think because 80% of the pattern was revealed in the first 4 months these last months feel like they are very slow. Agreed...
-
Done for now
-
Photo is too big. There is a post at the top of the 2024 BOM forum with help for posting photos
-
I tried to attach a picture under show your progress and it showed that I attached it but didn’t show up in my post only...
-
I finished my top by looking at the photo of the quilt and since there are no quilt police it doesn’t matter if it doesn’t...
-
Your project turned out great. I have the pattern but never got around to doing it. I do love, love
the way the pattern... -
Barbara C. You can also find them quickly by google search The Quilt Show You Tube. Click on it and then you
will... -
Love how warm and and pretty your color choices are. They look great on that bench
in the background that you see... -
Angela, You can find them here under learn, Pick a Petal, but I find them by doing a Google Search The Quilt Show You...
-
I finished this month's applique and now I'm waiting for next month's instructions....
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Viking bobbin winding
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Viking bobbin winding
I took my machine in for servicing this past week since the bobbin winder was 1) no longer winding evenly and 2) was winding too full. I also had a problem when a bobbin was too full, I had to sew with the bobbin cover off so I wouldn't get rats nest.
I found out that there is no adjustment for the bobbin winding evenly - I just have to watch it and move the thread up and down with my finger as it winds.
I also found out how to adjust the full-ness of the bobbin.
My big issue was with the 'too full' bobbin. Apparently the plastic bobbins used by Viking warp when the bobbin is filled too tightly or too full. Who knew!
I was told that when I wind my bobbin, I need to 1) use the footpedal on the lowest speed rather than the start/stop switch and 2) not wind the bobbin using the thread through the needle since that mucks up with the bobbin tension. This last bit really ticked me off. This is one of the bonuses I liked when I was looking at purchasing the machine... its DESIGNED to be wound that way... and now they're telling me I shouldn't *use* it that way?!?!
Frustrating!!Tags: None
- IP
-
thanks for the "heads up" about this issue--my daughter has a Husqvarna Viking machine and I'll tell her about this. There's not much else that makes me crazy as when I'm having trouble with my sewing machine--I really sympathize with you!!! It would really tick me off, too, if I bought a machine thinking certain features were a sure thing and then being told they didn't work. Judy in Torrance
- IP
-
I've been wondering about my bobbin winder too. Every machine I ever used stopped winding when it is full but my Viking just seems to go on and on. At first I didn't pay attention and had to unwind a bunch because it wouldn't fit in the machine. Is this how they all are or just my problem?
KarenLyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
Originally posted by vmckennaI have a Viking and I wind bobbins through the needle. Just make sure that you have a metal presser foot on and the thread goes under the foot. I also slow the speed down - it works great. As for the bobbin not stopping - you can turn the bobbin level knob (at least that's what I call it) to adjust the fullness of the bobbin. I don't remember which direction so you will need to experiment with this.Lyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
Originally posted by vmckennaI have a Viking and I wind bobbins through the needle. Just make sure that you have a metal presser foot on and the thread goes under the foot. I also slow the speed down - it works great. As for the bobbin not stopping - you can turn the bobbin level knob (at least that's what I call it) to adjust the fullness of the bobbin. I don't remember which direction so you will need to experiment with this.
I have the Platinum 770 and the bobbin level knob is a white thing right next to the bobbin winder on the top. Its basically a sensor that stops the winding once the thread has hit it, so turning it to the right (toward the bobbin) reduces the fullness. I found that this was one of my problems. I reduced the fullness and I think thats helping.Lyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
I have a Viking Sapphire 830 & here's what I do. I pop up the extra spool holder. I take my top thread spool off & just set it in the bed of the machine, without unthreading the machine. I then put a spool on the extra spool holder, & thread it through that top piece & over to the bobbin. Then I wind it that way. My thread that is threaded through the machine doesn't get tangled. Now, I do watch that the bobbin winds evenly, I noticed it may not otherwise, which, I thought was weird too. I also stop it when it's full enough. Can't even remember if it stops on it's own, or not. Only have had mine a little over a year, but I get tired of unthreading a machine, to thread a bobbin, &, I don't like threading it through the needle, so this works for me. You do need more than one spool of the thread you are using, with doing it this way, but I usually have that. I also do this on the Janome I have & it works on it too... No extra spool holder on it, but I just set the one spool in the bed too, & put the other spool on to load the bobbin. It helps to load several bobbins at a time too. Try this & see if it works for you!...Lyndhurst, Ohio USA - East Side Suburb of Cleveland, Ohio
- IP
Comment
-
Originally posted by kimberI took my machine in for servicing this past week since the bobbin winder was 1) no longer winding evenly and 2) was winding too full. I also had a problem when a bobbin was too full, I had to sew with the bobbin cover off so I wouldn't get rats nest.
I found out that there is no adjustment for the bobbin winding evenly - I just have to watch it and move the thread up and down with my finger as it winds.
I also found out how to adjust the full-ness of the bobbin.
My big issue was with the 'too full' bobbin. Apparently the plastic bobbins used by Viking warp when the bobbin is filled too tightly or too full. Who knew!
I was told that when I wind my bobbin, I need to 1) use the footpedal on the lowest speed rather than the start/stop switch and 2) not wind the bobbin using the thread through the needle since that mucks up with the bobbin tension. This last bit really ticked me off. This is one of the bonuses I liked when I was looking at purchasing the machine... its DESIGNED to be wound that way... and now they're telling me I shouldn't *use* it that way?!?!
Frustrating!!
I'm selling my BabyLock Quest. If anyone's interested, email me privately. No problems, we just haven't bonded. I love Vikings and I should have stuck with them.
from the beautiful Hudson Valley of NY
Gammill Classic Plus w/IQ
- IP
Comment
-
I have had Vikings since the late '90s. I wind both ways. When winding, I use the foot pedal(but if I used the Start button, I would reduce the speed to 1). The important part is that the thread goes thru the metal guide that keeps the thread winding evenly as well as the tensioner. When I have a problem with a particular wound bobbin, I rewind it onto an empty bobbin.
Never ever wind onto a partially filled bobbin.
Yes, you can turn the fill sensor to the right if it overfills. My old Viking had to have a special screw driver. My Viking tech is the greatest. That's why I'm a Viking girl. Service, service, service.
Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
- IP
Comment
-
I wind mine, like the third photo in your diagram shows. Really don't like doing it the other way, seems old, & out of kelter to me, as no other machine I have ever had, said to do it that way. I don't have a problem winding bobbins on my 830 either, so not sure what the real problem is. I also pay attention when I am winding bobbins, so I know what is going on & when it's full. I really like my machine & have no complaints about it. It is a bit nosier than my Janome, but that's okay with me too. I use mine now, mainly on my quilt frame & love it! Still perfecting the tension a tad, but that will come with practice too, I'm sure...
Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
- IP
Comment
-
I noticed today there is only one post. So here is my work. Fun little blocks.
-
Please inform if there are any instructions for the outer border . It uses the template B from the Centre block, but what...
-
Your color choices are great, and your quilting is beautifully done.
-
Beautiful work Helen!
-
This is absolutely beautiful! Congrats on a wonderful job!
-
Finished quilting yesterday! This was my first time to use spray baste. I sprayed each layer outside and then assembled...
-
So Sorry! I accidentally deleted my last post trying to edit and re-add a smaller photo so it would show up, which also...
-
Hi Barbara, I’m just wondering if the running stitch around the appliqué flowers stitched prior to quilting or is it...
-
I think because 80% of the pattern was revealed in the first 4 months these last months feel like they are very slow. Agreed...
-
Done for now
-
Photo is too big. There is a post at the top of the 2024 BOM forum with help for posting photos
-
I tried to attach a picture under show your progress and it showed that I attached it but didn’t show up in my post only...
-
I finished my top by looking at the photo of the quilt and since there are no quilt police it doesn’t matter if it doesn’t...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2890 users online. 557 members and 2333 guests.
Most users ever online was 20,162 at 02:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,234
Posts: 155,226
Members: 25684
Active Members: 1,326
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment