Quilting Forum

Announcement

Collapse
No announcement yet.

Latest Forum Posts

Collapse

  • MONTH 1 Ask Questions Here
    Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
  • MONTH 1 Ask Questions Here
    I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
  • UPLOADING PHOTOS to the FORUM
    Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
  • MONTH 1 Share Your Progress
    Please use this TOPIC to share your progress with Laurel Ridge.

    There is a STICKY TOPIC that explains how to...
  • MONTH 1 Ask Questions Here
    Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
  • FABRIC REQUIREMENTS are now posted
    Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
  • FABRIC REQUIREMENTS are now posted
    Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
  • NEW BLOG Up—How to be READY!
    Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
  • NEW BLOG Up—How to be READY!
    Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
  • Start a STITCH GROUP
    A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
  • Eq8?
    It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
  • Eq8?
    Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
    Thanks...
  • FABRIC REQUIREMENTS are now posted
    My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
  • FABRIC REQUIREMENTS are now posted
    Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
  • FABRIC REQUIREMENTS are now posted
    Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
  • FABRIC REQUIREMENTS are now posted
    Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
  • PICK A PETAL -- Show Your Finished Top Here
    Oh, how darling, So original. I love it.
  • FABRIC REQUIREMENTS are now posted
    Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
  • Loading...
  • No more items.

Trending Forum Posts

Collapse

  • Happy Dance! I won ribbons!
    Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
  • What I learned
    Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
  • Late at this but having difficulty
    Hi There,

    I hope you can help me. I know I'm very late in getting to this point but life is finally allowing...
  • Adding house numbers
    I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
  • Ahhhhh.. almost done! Have a question!!
    Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
  • My Colorful World With Parks by Duffy
    My quilt is finish
  • Printing for paper piecing question
    For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
  • Paper piecing color my world…anyone else?
    I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
  • Video Access
    Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
  • New to The Quilt Show
    I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
  • How to download pattern?
    I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
  • Quilting color my world
    See how I quilted Color My World and the added surprise quilting in Wendy’s border:

    https://bbquiltmaker.b...
  • Getting outer circle to lie flat
    Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
  • Great new way to see all the photos!
    Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.

    Open...
  • Color My World Pattern - Download Heads Up
    I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
  • Color my world — your finish here
    Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
  • Quilt is complete. Fun!
  • One World — This is Brilliant!
    Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
  • Loading...
  • No more items.

Month 5: Piecing the Star Blocks

Collapse
X
  • Time
  • Show
Clear All
new posts

    #16
    I have too much on my plate this year so am not able to tackle Two Of Us still not finished Sedona Star but I am following and watching Margo's videos I am learning so much Please don't stop Margo the videos are great. Joan

    Comment


      #17
      So glad you are finding some useful info in the videos! This month is really a quick and easy one compared to previous months! It won't take nearly as much time to get these 9 star blocks done. It is so tempting to sew the units together, but I'm trying to be patient and wait until the instructions tell us how Sue and Pat want us to do it!


      It's Not What You Gather, But What You Scatter
      That Tells What Kind Of Life You Have Lived !

      Comment


        #18
        I, too, am holding off sewing months 1-5 together. I have been so impressed by the pattern deviations done by Margo, Rita and others, that I want to keep my options for substitution open for as long as possible.


        from the Piedmont of North Carolina

        Comment


          #19
          Month 5 is done! I used paper piecing, and set the star into the background using Margo's instructions. Here's how I deviated a bit from the method in her video.

          I made the background template from 2 sheets of freezer paper ironed together so there was one shiny and one dull side exposed. Instead of marking and hand cutting the circle, I used a circle cutter (left from the days when I thought I was going to do scrap booking ). It cut a much cleaner edge than I could ever do by hand. I did a couple of mockups on cardstock and with scrap fabric to get the size right. The freezer paper template was then ironed to the background fabric, the center cut out, leaving about 1/2 inch seam allowance, clipped to within a few threads of the template, then starched and ironed down. My template was 7 inches square, and I cut the background fabric at 7 1/2 inches, so there would be enough freezer paper to stick it well. I tried to be careful with the starch, but I did end up replacing the template after the 5th block since the edges were getting worn.


          from the Piedmont of North Carolina

          Comment


            #20
            I have used Connie's method many times for circles, squares and other shapes and it works great and results in a super professional and perfect-looking product. I would highly recommend it. I think that the technique was even demonstrated on a TQS show and used by Alex when she made her circle quilt hanging in her quilt studio.

            BethMI

            Comment


              #21
              Looks good Connie. I wish I had a circle cutter. Is your one adjustable? I guess it must be. I cut out my template for the centre circle today and I used 3 layers of freezer paper which made it good and sturdy. I haven't done the background circle yet. Did you make the opening slightly bigger than the printout? I did a mock up and realized that it was going to be difficult to retain all the star points if I didn't make a slightly wider opening. I also made the centre circle slightly smaller than the printout because once the fabric has been starched around it it makes it just that bit too big so that the centre points are lost - or at least that's what I found. I managed to sew three of the star points today before setting off on my travels and really enjoyed it. I look forward to getting back on Monday and tackling them again.

              Comment


                #22
                Originally posted by Reetzbobeetz
                Looks good Connie. I wish I had a circle cutter. Is your one adjustable? I guess it must be. I cut out my template for the centre circle today and I used 3 layers of freezer paper which made it good and sturdy. I haven't done the background circle yet. Did you make the opening slightly bigger than the printout? I did a mock up and realized that it was going to be difficult to retain all the star points if I didn't make a slightly wider opening. I also made the centre circle slightly smaller than the printout because once the fabric has been starched around it it makes it just that bit too big so that the centre points are lost - or at least that's what I found. I managed to sew three of the star points today before setting off on my travels and really enjoyed it. I look forward to getting back on Monday and tackling them again.
                Rita, my circle cutter is adjustable, and I think the opening I used is slightly larger than on the pattern for the reason you mentioned, not losing star points when assembled.

                Have fun this weekend on your travels! (Singing for your supper again? )


                from the Piedmont of North Carolina

                Comment


                  #23
                  Hello everyone!! Belinda here, starting on month 5. I'm going to paper piece the star blocks just like I have on the previous months. Templates made and I have calculated I need to cut my strips 2"........???? I haven't seen any comments this month referring to this so I thought I would introduce myself and ask! With minimal fabric I would like to r-e-a-l-l-y be sure before I cut!!

                  My plans for the appliqué part is to do *hand appliqué*, soooooo, I may get a little behind on that part, but so far I have been able to stay up pretty current!

                  I have REALLY enjoyed reading everyone's info and comments! Especially for this WONDERFUL person who goes by the name of MARGO!! What a gal...!!! I could not have made it this far or probable gotten half of it right if not for MARGO and everybody on the forum who are so generous with their helpful tips and the encouragement I have seen given to others!!

                  Thanks so much everybody!!!! Ok, so do I cute my strips 2" or not????

                  --Belinda

                  p.s. Perhaps Margo mentioned the strip width in her video and I just didn't catch it....maybe I should go watch it again!

                  Comment


                    #24
                    Hi Belinda and welcome to the forum. I cut my strips at 2" and that worked out perfectly. I hope that helps. And, don't forget to post your photos in the BOM show and tell. If you don't know where it is just go to BOM on the bar at the top of the page. Scroll down and you will find 'Show and Tell'.

                    Comment


                      #25
                      Originally posted by 2bnoel
                      Hello everyone!! Belinda here, starting on month 5. I'm going to paper piece the star blocks just like I have on the previous months. Templates made and I have calculated I need to cut my strips 2"........???? I haven't seen any comments this month referring to this so I thought I would introduce myself and ask! With minimal fabric I would like to r-e-a-l-l-y be sure before I cut!!

                      My plans for the appliqué part is to do *hand appliqué*, soooooo, I may get a little behind on that part, but so far I have been able to stay up pretty current!

                      I have REALLY enjoyed reading everyone's info and comments! Especially for this WONDERFUL person who goes by the name of MARGO!! What a gal...!!! I could not have made it this far or probable gotten half of it right if not for MARGO and everybody on the forum who are so generous with their helpful tips and the encouragement I have seen given to others!!

                      Thanks so much everybody!!!! Ok, so do I cute my strips 2" or not????

                      --Belinda

                      p.s. Perhaps Margo mentioned the strip width in her video and I just didn't catch it....maybe I should go watch it again!
                      Hi Belinda! Thanks for the kudos, and welcome to the forum!
                      You are right, it is not mentioned in the video for month 5, but 2" strips will work just fine.
                      And please remember that what I show is not the only way to do these units!! Find what works for you!
                      And, for what it's worth, hand applique is my favorite technique, but because I'm making two versions of this project, I'm doing the applique by machine this time around! :wink:


                      It's Not What You Gather, But What You Scatter
                      That Tells What Kind Of Life You Have Lived !

                      Comment


                        #26
                        Originally posted by Reetzbobeetz
                        Hi Belinda and welcome to the forum. I cut my strips at 2" and that worked out perfectly. I hope that helps. And, don't forget to post your photos in the BOM show and tell. If you don't know where it is just go to BOM on the bar at the top of the page. Scroll down and you will find 'Show and Tell'.
                        Thanks so much Rita!!! I'll work on this today!!

                        -BELINDA

                        Comment


                          #27
                          Originally posted by Margo
                          Originally posted by 2bnoel
                          Hello everyone!! Belinda here, starting on month 5. I'm going to paper piece the star blocks just like I have on the previous months. Templates made and I have calculated I need to cut my strips 2"........???? I haven't seen any comments this month referring to this so I thought I would introduce myself and ask! With minimal fabric I would like to r-e-a-l-l-y be sure before I cut!!

                          My plans for the appliqué part is to do *hand appliqué*, soooooo, I may get a little behind on that part, but so far I have been able to stay up pretty current!

                          I have REALLY enjoyed reading everyone's info and comments! Especially for this WONDERFUL person who goes by the name of MARGO!! What a gal...!!! I could not have made it this far or probable gotten half of it right if not for MARGO and everybody on the forum who are so generous with their helpful tips and the encouragement I have seen given to others!!

                          Thanks so much everybody!!!! Ok, so do I cute my strips 2" or not????

                          --Belinda

                          p.s. Perhaps Margo mentioned the strip width in her video and I just didn't catch it....maybe I should go watch it again!
                          Hi Belinda! Thanks for the kudos, and welcome to the forum!
                          You are right, it is not mentioned in the video for month 5, but 2" strips will work just fine.
                          And please remember that what I show is not the only way to do these units!! Find what works for you!
                          And, for what it's worth, hand applique is my favorite technique, but because I'm making two versions of this project, I'm doing the applique by machine this time around! :wink:
                          Thanks Margo!! I was tempted to try the striplet piecing this month, thought about it, naaaaaaaa! Paper piecing is just too darn easy!
                          I was also soooo glad I read and re-read the instructions, it was about the 3rd read it soaked in to cut out the borders before I cut out the paper piece strips! YIKES....I nearly messed up!! ha!

                          -BELINDA

                          Comment


                            #28
                            Month 5 done, yay!

                            I am happy to report that I experienced zero fear or anxiety with the circles this month. I am so grateful to Margo for every tidbit of information, but especially for The Circle Conqueror.

                            This month I used my Cameo cutter to make a cardstock template 6" square with the large circle perfectly centered and then cut out. I used the template to place the circle on the green fabric and then trace it. I cut out within 1/2" of the green circle, starched the edge of the cutout, and used the template to iron the edges. It worked like a charm, although I wished I had remembered to make the circle slightly larger than the pattern so that the points had more room.

                            My points land right on the circle, and I am not unhappy with the result but next time I will remember. Live and learn!



                            Barb in AL (aka Liz)

                            Comment


                              #29
                              Beautiful star blocks, Barb! Your points look pretty pointy to me!!!


                              from the Piedmont of North Carolina

                              Comment


                                #30
                                Well done B/Liz, they look pretty perky to me too!

                                Comment

                                What's Going On

                                Collapse

                                There are currently 1882 users online. 293 members and 1589 guests.

                                Most users ever online was 20,162 at 03:06 PM on 02-20-2024.

                                Forum Stats

                                Collapse

                                Topics: 8,272   Posts: 155,407   Members: 26576   Active Members: 1,811  
                                Welcome to our newest member, [email protected].

                                Latest Topics

                                Collapse

                                • MONTH 1 Ask Questions Here
                                  Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
                                • MONTH 1 Ask Questions Here
                                  I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
                                • UPLOADING PHOTOS to the FORUM
                                  Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
                                • MONTH 1 Share Your Progress
                                  Please use this TOPIC to share your progress with Laurel Ridge.

                                  There is a STICKY TOPIC that explains how to...
                                • MONTH 1 Ask Questions Here
                                  Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
                                • FABRIC REQUIREMENTS are now posted
                                  Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
                                • FABRIC REQUIREMENTS are now posted
                                  Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
                                • NEW BLOG Up—How to be READY!
                                  Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
                                • NEW BLOG Up—How to be READY!
                                  Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
                                • Start a STITCH GROUP
                                  A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
                                • Eq8?
                                  It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
                                • Eq8?
                                  Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
                                  Thanks...
                                • FABRIC REQUIREMENTS are now posted
                                  My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
                                • Loading...
                                • No more items.

                                Trending

                                Collapse

                                There are no results that meet this criteria.

                                Working...
                                X