Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
No, she figured it all out.
-
Shared this afternoon by the quilt show that someone has already finished her quilt? How is that possible??? Do we have...
-
I could’nt stand it! While it saddens me greatly to pull the very colorful fabric, I just did not see how I could have...
-
I did the same thing, and was able to replace the fabric by using the fabric no. and doing a search. I found what I needed...
-
Vicki H, How distorted are they? Can you post a picture? You might be able to block them back to
correct size and... -
Janet, My guess if it is not your printer as Barbara suggested, it might be your cutting or seam allowances. Measure each...
-
Finished Month Four for both the Grandmother and Granddaughter quilts. I found this block to be really labor intensive...
-
Did you measure the page to be sure it is printed correctly?
-
Strips are 1.5, seam is .25, but strip doesn't match .
-
Ooooh, I love your southwest theme <3 We have a home in southern Arizona (I split my time between my home state of Texas...
-
Still working on the month 2 but have the rest done.
-
Doing this is all blue and white from my stash. So much fun
-
The instructions and tips are wonderful!!!
-
It's right in the Facebook LIVE section of LEARN/2025 BOM:
https://thequiltshow.com/learn/category/block-of-the-m... -
Be sure to let the starch dry completely before pressing.
You might also try starching a hunk of fabric before cutting... -
I went to learn to see Barbara’s video, but was unable to find it. Where can I find it?
-
After cutting these strips, I starch them and they became distorted. Any tips?
-
I cut my strips and then starch them. They became distorted. Any tips
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Half-size measurements
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
KANSAS STAR BLOCK
That's a mathematical challenge...
For those who do not want to paper-piece the square-in-a-square (which, finished measure 1"), here are the exact cutting instructions:
For one "square-in-a-square" unit:
Center square: 1-7/32" (okay, that's about a "hair" smaller than 1-1/4")
For the triangles: 2 squares 1-3/4" (which is too big - will be cut to correct size once it is sewn), cut once on the diagonal.
I used a drawing in EQ7 to create the foundations. But you can also draw them using graph paper. (or I can send you the PDF)
Then, it's just "regular" paper-piecing (just so small):
Once the triangles are sewn and the "square-in-a-square"is completed, it needs to be cut to 1-1/2".
To do this, you can either follow instructions, or place the 3/4" mark in the center of the center square (aligned with the corners):
Then, follow instructions to complete the block.
- IP
-
The block measures 3-1/2" x 3-1/2" from raw edge to raw edge.
BACKGROUND FABRIC:
1 rectangle 1-1/2" x 3-1/2" (at the bottom of the block)
1 rectangle 3-1/2 x 4-1/2 (for the most part of the K)
I cut the bottom part a little larger so I would have some room to adjust the leg of the letter K. I did the same with the left background.
To align it, I traced the stitch line (with frixion pen) and I placed the letter on top. Where the letter intersect with that line, it needs to be aligned with the "point" of the inner square.
Start with the bottom part and cut the background to the correct size, and then do the left part.
The panel measures 6-1/2" x 4-1/2" from raw edge to raw edge:
- IP
Comment
-
MAYFLOWER
Panel size : 4" x 8"
Block Size: 4" x 3-1/2 (for both "boats")
Even though the instructions are clear, and the block is beautiful, I've made a few changes to reduce the number of seems for this half-size. The less bulk there is in some places, the better (for me anyway).
If you still wish to make the block "as per original", I put the cutting instructions as well as for my version (minor changes).
Water:
Original version: 2 rectangles 1" x 2-1/2" My version: 1 rectangle 1" x 4-1/2" (actually, 2" x 4-1/2" - I'll tell you why later)
Boats:
2 rectangles 1" x 2-1/2
4 squares of "sky" 1" x 1"
Sails:
4 squares "sky" 1-3/4"1-3/4"
4 squares "white" or "color" 1-3/4" x 1-3/4"
Sky:
ORIGINAL VERSION: 4 rectangles 1" x 1-1/2" MY VERSION: 2 rectangles 1" x 1-1/2" PLUS 1 square 1-1/2" x 1-1/2"
Plus 1 rectangle 2" x 4-1/2"
Background: 1rectangle 4-1/2" x 5"
STEP 1: Make the 8 HST from the 1-3/4 squares, and trim them to 1" x 1".
STEP 2: Make the boat as per instruction, but for MY VERSION: SEW THEM TOGETHER and press the seem open:
STEP 3: To be skipped in MY VERSION.
Step 4: Make the sails as per instructions.
STEP 5: FOR MY VERSION: arrange the sails and the sky in this manner and sew the units together:
Step 6: Sew the sails unit to the boats unit (but no need to repeat for MY VERSION).
Step 7: FOR MY VERSION: sew the "water" strip to the "boat" piece:
Step 8: Join the Sky rectangle to the top of the block.
Now this is why I cut the water strip wider: I wanted to make the "water" larger,so I trimmed the sky accordingly, making sure the block would measure 4-1/2" X 4" (from raw edge to raw edge) I actually made the water 1/4" larger. I will not add the stars anyway...
- IP
Comment
-
Originally posted by janetstoneOriginally posted by AndreeBergeronThank youops:
But it is YOUR quilt that is soooo beautiful and fun to do!
(I just love the math)
Andrée
Andrée
- IP
Comment
-
No, she figured it all out.
-
Shared this afternoon by the quilt show that someone has already finished her quilt? How is that possible??? Do we have...
-
I could’nt stand it! While it saddens me greatly to pull the very colorful fabric, I just did not see how I could have...
-
I did the same thing, and was able to replace the fabric by using the fabric no. and doing a search. I found what I needed...
-
Vicki H, How distorted are they? Can you post a picture? You might be able to block them back to
correct size and... -
Janet, My guess if it is not your printer as Barbara suggested, it might be your cutting or seam allowances. Measure each...
-
Finished Month Four for both the Grandmother and Granddaughter quilts. I found this block to be really labor intensive...
-
Did you measure the page to be sure it is printed correctly?
-
Strips are 1.5, seam is .25, but strip doesn't match .
-
Ooooh, I love your southwest theme <3 We have a home in southern Arizona (I split my time between my home state of Texas...
-
Still working on the month 2 but have the rest done.
-
Doing this is all blue and white from my stash. So much fun
-
The instructions and tips are wonderful!!!
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2031 users online. 463 members and 1568 guests.
Most users ever online was 20,162 at 02:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,305
Posts: 156,131
Members: 27350
Active Members: 1,295
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment