Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
-
Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
-
Oh, how darling, So original. I love it.
-
Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Please help me decide which machine
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Please help me decide which machine
After trying several machines, I've narrowed it down to two: The Tin Lizzie and the Voyager17/Hinterberg. The "Lizzie" is twice the price of the Voyager but I couldn't tell the difference during my test drives. In reading past messages, it seems the Voyager people really love their machines, yet stores that carry both tell me that the Tin Lizzie is a much better machine. Does that mean the Voyager isn't good? Does anyone have any feedback to help me decide?
BarbaraFrom the edge of Sherwood Forest, home of Robin Hood
Tags: None
- IP
-
Barbara, I can't help you with either of those brands, but I can tell you that I bought a HandiQuilter16 in May, and absolutely LOVE IT!! If you haven't tried one yet, you might want to, and check the price against the other two you are looking at.
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
-
I just ordered an HQ16 as well, but it's my 2nd one. I sold the first one when we decided to fulltime in our RV for a few years, so I'm simply replacing what I already know to be a great product. So... I 2nd the "try the HQ16" post!
Have you "Tinkled" today?
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
Comment
-
Originally posted by cjtinkleI just ordered an HQ16 as well, but it's my 2nd one. I sold the first one when we decided to fulltime in our RV for a few years, so I'm simply replacing what I already know to be a great product. So... I 2nd the "try the HQ16" post!
Have you "Tinkled" today?
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
Comment
-
Barbara,
This decision is 100% personal. The only way you can decide is to test drive the machines you're thinking about.
Think about what you want to use it for and how often you'll use it. If you're starting a business, you need a work horse. If you'll be doing only your own quilts on an occasional basis, then it doesn't need to be so heavy duty.
Where will you keep it? Are you willing to give up a room or will it have to be able to be dismantled?
All of these questions need to be considered.
eileenkny
from the beautiful Hudson Valley of NY
Gammill Classic Plus w/IQ
- IP
Comment
-
I have the V17w/Hinty stretch frame & I love it. I don't have a stitch regulator and after 4 yrs without one I haven't been able to justify the cost. Your question about the difference between these 2 machines - I know that the Tin Lizzie has a built in SR and I believe it it is a 'longarm' where the V17 is a 'stretched machine' (Singer Industrial).
see some of my quilts here
http://community.webshots.com/user/wnott
from the beautiful Hudson Valley of NY
Gammill Classic Plus w/IQ
- IP
Comment
-
I finally decided on neither! I bought a Viking Megaquilter and the new Inspira Imperial frame. I've had it about 3 months and I love it. It does have drawbacks - namely only about 4-5 inches in which to work. Since I plan to do mostly freehand all over designs, this will work well for me. I'm mostly a handquilter, but it is nice to have one done in a day instead of 6 months! I figure if I like machine quilting and want to upgrade, I can do that in the future. For now, the price and ease of use for the Mega Quilter are great. Another BIG factor in my choice was the wonderful support and service I received from Country Sewing Center in Elk Grove. They even came and set it up in my sewing room!
Barbara
from the beautiful Hudson Valley of NY
Gammill Classic Plus w/IQ
- IP
Comment
-
I did a lot of research and decided on the Athena which is the HQ 18" machine. I have found it very user friendly and love the results. Even after looking at them and "test driving" them in the store, I was amazed at how large they are when set up. Make sure you get full measurements including the extra space when you need to work behind the machine for pantographs. In my opinion, the frame is almost as important. I have used the standard type frame but decided to go for the precision glide studio frame. It is very sturdy and the machine glides so much easier. It was well worth the extra money. Good luck.
- IP
Comment
-
Yes, Margo, you are right...I seem to have this block about the actual name...it is the Avante and I finished another small quilt this morning. That was my first ever post on this site...I'm a novice. Thanks for setting me straight.
Sue
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
Comment
-
Not a problem, Sue! We are glad to have you join us!
I think there is a domestic machine called the Athena put out by Singer. I have a Handi-Quilter16 and absolutely love it!! I would love to have the extra space of the Avante`, but since I don't ever plan to quilt for other people, the 16" is going to be just fine for me.
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
Comment
-
First I will start by saying I teach longarm quilting, and I have used nearly all the machines available. I was looking to buy a new longarm and thought it would be helpful for others to have some advice when they are shopping. Now that I have quilted for many years and owned many machines, new shoppers might benefit from what I have learned. I wrote an article that I offer free on my website http://quiltsonthecorner.com. You can find the article in the store on the "books and dvd's" page. It is free...but you will need to "purchase" it by placing it in your cart and checking out. When it asks for payment type just click on continue. You do not need to enter any payment information.
Good luck in your shopping!
Renae Haddadin
http://quiltsonthecorner.com
a new tip every Wednesday
- IP
Comment
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2166 users online. 264 members and 1902 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,407
Members: 26577
Active Members: 1,813
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment