Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
I noticed today there is only one post. So here is my work. Fun little blocks.
-
Please inform if there are any instructions for the outer border . It uses the template B from the Centre block, but what...
-
Your color choices are great, and your quilting is beautifully done.
-
Beautiful work Helen!
-
This is absolutely beautiful! Congrats on a wonderful job!
-
Finished quilting yesterday! This was my first time to use spray baste. I sprayed each layer outside and then assembled...
-
So Sorry! I accidentally deleted my last post trying to edit and re-add a smaller photo so it would show up, which also...
-
Hi Barbara, I’m just wondering if the running stitch around the appliqué flowers stitched prior to quilting or is it...
-
I think because 80% of the pattern was revealed in the first 4 months these last months feel like they are very slow. Agreed...
-
Done for now
-
Photo is too big. There is a post at the top of the 2024 BOM forum with help for posting photos
-
I tried to attach a picture under show your progress and it showed that I attached it but didn’t show up in my post only...
-
I finished my top by looking at the photo of the quilt and since there are no quilt police it doesn’t matter if it doesn’t...
-
Your project turned out great. I have the pattern but never got around to doing it. I do love, love
the way the pattern... -
Barbara C. You can also find them quickly by google search The Quilt Show You Tube. Click on it and then you
will... -
Love how warm and and pretty your color choices are. They look great on that bench
in the background that you see... -
Angela, You can find them here under learn, Pick a Petal, but I find them by doing a Google Search The Quilt Show You...
-
I finished this month's applique and now I'm waiting for next month's instructions....
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
MegaQuilter Breaking Threads
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
MegaQuilter Breaking Threads
I have a viking megaquilter. I have been practicing free motion and have a lot of trouble with the needle thread breaking frequently.
I had the machine cleaned and serviced - he said the settings were all perfect and nothing wrong with it. I've tried new needle, different needle sizes, different threads and needle combinations and still no luck. Help!!!Tags: None
- IP
-
Sometimes there can be a tiny burr somewhere along the thread path that causes the thread to be stressed and break. If you can find some sanding thread at a hardware store you can floss along the thread path and that may smooth it out.
I used a lot of monofiliment thread for years on one machine before I realized that it had actually worn a groove in one of my thread guides that was causing other (heavier) threads to break, and I had to replace the last guide before the needle. This is NOT something that most machine techs check for!
You might also want to check your tension. Start with your bobbin tension and then adjust your top tension to get a good stitch. If you aren't sure about adjusting your tension, you will find lots of great information here: http://www.superiorthreads.com/education/
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
-
I had a Megaquilter a few years ago and found that when it was on the frame, I had to lower the top tension. Try lowering the top tension incrementally until the thread stops breaking, but also check your stitch appearance top and bottom. I also found some threads worked better than others. If I used Superior Threads King Tut on the top, I used a #16 topstitch needle and Bottom Line in the bobbin. Topstitch needles are the best as they put less stress on the thread. Hope this will help.
Woodbury, Minnesota, USA
Longarm quilter - Gammill Statler
- IP
Comment
-
Originally posted by MargoSometimes there can be a tiny burr somewhere along the thread path that causes the thread to be stressed and break. If you can find some sanding thread at a hardware store you can floss along the thread path and that may smooth it out.
I used a lot of monofiliment thread for years on one machine before I realized that it had actually worn a groove in one of my thread guides that was causing other (heavier) threads to break, and I had to replace the last guide before the needle. This is NOT something that most machine techs check for!
You might also want to check your tension. Start with your bobbin tension and then adjust your top tension to get a good stitch. If you aren't sure about adjusting your tension, you will find lots of great information here: http://www.superiorthreads.com/education/
Any books that you would recommend for smoeone learning free motion ona domestic machine?
I also love your tutorials!
- IP
Comment
-
Originally posted by rossimiI had a Megaquilter a few years ago and found that when it was on the frame, I had to lower the top tension. Try lowering the top tension incrementally until the thread stops breaking, but also check your stitch appearance top and bottom. I also found some threads worked better than others. If I used Superior Threads King Tut on the top, I used a #16 topstitch needle and Bottom Line in the bobbin. Topstitch needles are the best as they put less stress on the thread. Hope this will help.
- IP
Comment
-
Originally posted by bean53Originally posted by MargoSometimes there can be a tiny burr somewhere along the thread path that causes the thread to be stressed and break. If you can find some sanding thread at a hardware store you can floss along the thread path and that may smooth it out.
I used a lot of monofiliment thread for years on one machine before I realized that it had actually worn a groove in one of my thread guides that was causing other (heavier) threads to break, and I had to replace the last guide before the needle. This is NOT something that most machine techs check for!
You might also want to check your tension. Start with your bobbin tension and then adjust your top tension to get a good stitch. If you aren't sure about adjusting your tension, you will find lots of great information here: http://www.superiorthreads.com/education/
Any books that you would recommend for smoeone learning free motion ona domestic machine?
I also love your tutorials!
Check out Alex's book: https://alexandersonquilts.com/cart/...8&cat_id=2
My favorites:
Diane Gaudynski's books: http://www.amazon.com/Guide-Machine-...129&sr=1-1
http://www.amazon.com/Quilt-Savvy-Ga...129&sr=1-2
or check Youtube videos for "machine quilting" for tons of free info!
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
Comment
-
I just started using my MegaQuilter and the threat is constantly breaking, the machine also catches on the quilt and doesnt move. What am I doing wrong. I am so frustrated right now. The machine is brand new and I am wishing for my Bernina back to do the quilting!!! ARggh :?
And what kind of threat should i use?
Woodbury, Minnesota, USA
Longarm quilter - Gammill Statler
- IP
Comment
-
I have a mega-quilter and had to sit down for an afternoon and learn to adjust the tension for the thread I was using. I used only Superior or YLI threads because the cotton threads left so much lint in the bobbin race that this impaired the movement of the machine and I had to clean it frequently. The other reason my thread would break was using the wrong needle. I used Schmetz 90/14 and 100/16 topstitch needles. I suggest you look into the Yahoo mega-quilter or grand-quilter groups. I learned soooo much from owners of these machines from all across the country. Good luck! Terrina
Woodbury, Minnesota, USA
Longarm quilter - Gammill Statler
- IP
Comment
-
I am a member of the Pfaff Hobby Grand quilter group on yahoo.which is the same machine as the Mega quilter, the Inspira needles top stitch are recommended by the group leader.
I use my machine to free motion all the time, something you might consider if this is all you will use this for, remove the feed dogs. instead of using the plate to cover them up.
Be sure to put the screws back in the holes and remember where you store the feed dogs. I put them back in when I want to paper piece. Just a thought.Carolyn Owens
- IP
Comment
-
I noticed today there is only one post. So here is my work. Fun little blocks.
-
Please inform if there are any instructions for the outer border . It uses the template B from the Centre block, but what...
-
Your color choices are great, and your quilting is beautifully done.
-
Beautiful work Helen!
-
This is absolutely beautiful! Congrats on a wonderful job!
-
Finished quilting yesterday! This was my first time to use spray baste. I sprayed each layer outside and then assembled...
-
So Sorry! I accidentally deleted my last post trying to edit and re-add a smaller photo so it would show up, which also...
-
Hi Barbara, I’m just wondering if the running stitch around the appliqué flowers stitched prior to quilting or is it...
-
I think because 80% of the pattern was revealed in the first 4 months these last months feel like they are very slow. Agreed...
-
Done for now
-
Photo is too big. There is a post at the top of the 2024 BOM forum with help for posting photos
-
I tried to attach a picture under show your progress and it showed that I attached it but didn’t show up in my post only...
-
I finished my top by looking at the photo of the quilt and since there are no quilt police it doesn’t matter if it doesn’t...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2880 users online. 561 members and 2319 guests.
Most users ever online was 20,162 at 02:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,234
Posts: 155,226
Members: 25684
Active Members: 1,326
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment