Quilting Forum

Announcement

Collapse
No announcement yet.

Latest Forum Posts

Collapse

  • MONTH 1 Ask Questions Here
    Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
  • MONTH 1 Ask Questions Here
    I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
  • UPLOADING PHOTOS to the FORUM
    Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
  • MONTH 1 Share Your Progress
    Please use this TOPIC to share your progress with Laurel Ridge.

    There is a STICKY TOPIC that explains how to...
  • MONTH 1 Ask Questions Here
    Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
  • FABRIC REQUIREMENTS are now posted
    Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
  • FABRIC REQUIREMENTS are now posted
    Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
  • NEW BLOG Up—How to be READY!
    Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
  • NEW BLOG Up—How to be READY!
    Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
  • Start a STITCH GROUP
    A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
  • Eq8?
    It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
  • Eq8?
    Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
    Thanks...
  • FABRIC REQUIREMENTS are now posted
    My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
  • FABRIC REQUIREMENTS are now posted
    Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
  • FABRIC REQUIREMENTS are now posted
    Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
  • FABRIC REQUIREMENTS are now posted
    Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
  • PICK A PETAL -- Show Your Finished Top Here
    Oh, how darling, So original. I love it.
  • FABRIC REQUIREMENTS are now posted
    Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
  • Loading...
  • No more items.

Trending Forum Posts

Collapse

  • Happy Dance! I won ribbons!
    Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
  • What I learned
    Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
  • Late at this but having difficulty
    Hi There,

    I hope you can help me. I know I'm very late in getting to this point but life is finally allowing...
  • Adding house numbers
    I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
  • Ahhhhh.. almost done! Have a question!!
    Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
  • My Colorful World With Parks by Duffy
    My quilt is finish
  • Printing for paper piecing question
    For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
  • Paper piecing color my world…anyone else?
    I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
  • Video Access
    Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
  • New to The Quilt Show
    I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
  • How to download pattern?
    I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
  • Quilting color my world
    See how I quilted Color My World and the added surprise quilting in Wendy’s border:

    https://bbquiltmaker.b...
  • Getting outer circle to lie flat
    Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
  • Great new way to see all the photos!
    Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.

    Open...
  • Color My World Pattern - Download Heads Up
    I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
  • Color my world — your finish here
    Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
  • Quilt is complete. Fun!
  • One World — This is Brilliant!
    Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
  • Loading...
  • No more items.

Quilt Sew East Discs

Collapse
X
  • Time
  • Show
Clear All
new posts

    Quilt Sew East Discs

    I loved watching the Paula Reid show and was very taken with the 'Quilt Sew Easy Discs' that she was using. Has anyone on the forum tried this product? I am a fan of the Quilt Halo, this product however looks even better to use.

    Happy New Year to everyone.
    Heather from Oz

    #2
    OOPS! I can't spell.....................should be EASY not EAST!!!!!!!!

    Heather

    Comment


      #3
      I have never seen these discs before but I'm using the same method just putting anti slip stuff under my hands. You know the stuff you can put in your drawers to keep everything from rushing around. Hope you understand.

      living in Central Denmark
      Charlie Brown: The secret is to look fantastic at a distance

      Comment


        #4
        What a good idea, Zarah....................I know exactly what you mean.
        I will try that before I buy anything more complicated...................and dare I say, expensive. I love to buy gadgets, I am an easy target, but too many end up in the too hard or I can't be bothered basket!
        Thank you for your response.
        Heather

        Comment


          #5
          Hi Norma /aka Zarah.
          I also use the anti slip stuff you put in drawers, I sew them into little mitts that just fit over my fingers and palm of the hand.
          You can use your machine to sew them.
          Anne

          Comment


            #6
            Heather, I believe that Alex uses a product similar if not the same. I use gardening gloves. the ones with little rubber dimples on the palm and fingers. Much cheaper than all the fancy quilting gloves sold and just as effective I believe.


            In leafy Berkshire, south of England.

            Comment


              #7
              I was a sucker for the Quilt Halo from Sharon Schamber. I found it more trouble than it's worth. I found little bits of shelf liner got stitched to the bottom of the quilt (having lost track of one piece and cut another). I've tried cutting off the ends of expensive rubber gloves like a guest on TQS suggested. Those didn't stay on. I tried the finger grippers from the office supply store. Those didn't stay on. I think I've tried every suggestion I've seen for the past 20 years.

              Gloves, that's what work for me, and not Fons and Porter, not Joann's knock-offs, not gardening gloves, but real Machingers. I've worn the grip off one pair and half off the 2nd pair, but they last a really long time. They get filthy from the fabric, but can be washed. Worth every cent.

              Of course, it's all on what works for us...

              Comment


                #8
                If you are going to try cutting the fingers off of rubber gloves (a Sue Nickels suggestion), she says you should get a pair of gloves that are a size smaller than you normally wear so the finger tips stay on. I've only tried that in her class, so didn't try long enough to see if that works for me. I normally wear machingers, too.

                Nancy

                Comment


                  #9
                  I have the Machingers also, but in spite of what people are telling you, my hands get so hot that I can't stand it. I had trouble with handling the thread and scissors with them on. I cut the anti slips sown to fit my hand or a bit smaller.

                  living in Central Denmark
                  Charlie Brown: The secret is to look fantastic at a distance

                  Comment


                    #10
                    That was an early DVD. Paula has developed her own called Batt Scooters. I have a pair and use them quite easily.
                    Here is her site. http://www.battsintheattic.com


                    Coast of South Carolina USA
                    Sewing/Quilting on my Viking Sapphire 870

                    Comment


                      #11
                      Don't laugh but I'm so loving my gloves pictured below. They are football, receiver gloves and are insanely wonderful. I've tried nearly everything and these work the best for me. I learned about them in a class that I took from Jerry Granata. I purchased them at a local discount store call Big Lots for $10. I wish I'd bought more just so I would have an extra. I ended up having to get youth size large because my hands were too small for the adult small.

                      And check out the cool bones!!!

                      P.S. They do not make your hands hot at all. I really love these.


                      aka ladyquilter

                      Troutdale, OR
                      <!-- m --><a class="postlink" href="http://www.sweetpeaz.com/wordpress">http://www.sweetpeaz.com/wordpress</a><!-- m -->

                      Comment


                        #12
                        I have two things I use. One is a pair of gardening gloves that were very inexpensive and are light weight and breathable. The other is "Quacker Glides" that I bought at a quilt show from PennywinkleValleyRanch.com. At the time I bought the glides they were $14.95 for the two. I don't use these two things together. I find the glides work well when I am working on areas that I need a bit more control.

                        aka ladyquilter

                        Troutdale, OR
                        <!-- m --><a class="postlink" href="http://www.sweetpeaz.com/wordpress">http://www.sweetpeaz.com/wordpress</a><!-- m -->

                        Comment


                          #13
                          I use Machingers and Batt Scooters....both I like very much...I used most of the other things mentioned
                          here, but have settled on these two depending on the quilt circumstances !!

                          Comment


                            #14
                            I have tried gardening gloves of all sorts and found they just didn't grip enough. I use Machingers now and have never looked back. I think that there is nothing else like them. I don't find my hands get too hot in them (but then it never gets too hot here anyway) and I love the grip they give. I don't liked the idea of the halo because I know that I would end up constantly banging my sewing foot into it, even if it does have a good grip.

                            Comment


                              #15
                              I've tried the halo, tried all kinds of gloves incl. machingers. What I hate about most gloves is that I can't thread the needle very well and have to take them off. I bought a nice pair of tightly fitting riding gloves, and they work very well. But my all time favorite are the finger tops cut off regular kitchen gloves that are a size too small for me. Two or three per hand works fine. I can thread the needle and all other tadks easily, have even discovered I'm still wearing them a few times when I ran into the shops quickly before they closed on a Saturday afternoon... I generally use the slightly more expensive, latex free gloves, but not always
                              Lotti, Kuessnacht - Switzerland

                              Comment

                              What's Going On

                              Collapse

                              There are currently 2033 users online. 285 members and 1748 guests.

                              Most users ever online was 20,162 at 03:06 PM on 02-20-2024.

                              Forum Stats

                              Collapse

                              Topics: 8,272   Posts: 155,407   Members: 26576   Active Members: 1,811  
                              Welcome to our newest member, [email protected].

                              Latest Topics

                              Collapse

                              • MONTH 1 Ask Questions Here
                                Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
                              • MONTH 1 Ask Questions Here
                                I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
                              • UPLOADING PHOTOS to the FORUM
                                Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
                              • MONTH 1 Share Your Progress
                                Please use this TOPIC to share your progress with Laurel Ridge.

                                There is a STICKY TOPIC that explains how to...
                              • MONTH 1 Ask Questions Here
                                Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
                              • FABRIC REQUIREMENTS are now posted
                                Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
                              • FABRIC REQUIREMENTS are now posted
                                Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
                              • NEW BLOG Up—How to be READY!
                                Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
                              • NEW BLOG Up—How to be READY!
                                Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
                              • Start a STITCH GROUP
                                A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
                              • Eq8?
                                It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
                              • Eq8?
                                Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
                                Thanks...
                              • FABRIC REQUIREMENTS are now posted
                                My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
                              • Loading...
                              • No more items.

                              Trending

                              Collapse

                              There are no results that meet this criteria.

                              Working...
                              X