Quilting Forum

Announcement

Collapse
No announcement yet.

Latest Forum Posts

Collapse

  • MONTH 1 Share Your Progress
    Barbara, I was wondering if you would be willing to post your block photos for the month each month as we get started....
  • MONTH 12 -- Show Your Completed Top Here!
    Beautiful!
  • MONTH 12 -- Show Your Completed Top Here!
    Homeward bound. The long journey finally done...
  • MONTH 1 Ask Questions Here
    Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
  • MONTH 1 Ask Questions Here
    I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
  • UPLOADING PHOTOS to the FORUM
    Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
  • MONTH 1 Share Your Progress
    Please use this TOPIC to share your progress with Laurel Ridge.

    There is a STICKY TOPIC that explains how to...
  • MONTH 1 Ask Questions Here
    Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
  • FABRIC REQUIREMENTS are now posted
    Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
  • FABRIC REQUIREMENTS are now posted
    Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
  • NEW BLOG Up—How to be READY!
    Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
  • NEW BLOG Up—How to be READY!
    Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
  • Start a STITCH GROUP
    A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
  • Eq8?
    It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
  • Eq8?
    Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
    Thanks...
  • FABRIC REQUIREMENTS are now posted
    My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
  • FABRIC REQUIREMENTS are now posted
    Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
  • FABRIC REQUIREMENTS are now posted
    Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
  • Loading...
  • No more items.

Trending Forum Posts

Collapse

  • Happy Dance! I won ribbons!
    Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
  • What I learned
    Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
  • Late at this but having difficulty
    Hi There,

    I hope you can help me. I know I'm very late in getting to this point but life is finally allowing...
  • Adding house numbers
    I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
  • Ahhhhh.. almost done! Have a question!!
    Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
  • My Colorful World With Parks by Duffy
    My quilt is finish
  • Printing for paper piecing question
    For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
  • Paper piecing color my world…anyone else?
    I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
  • Video Access
    Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
  • New to The Quilt Show
    I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
  • How to download pattern?
    I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
  • Quilting color my world
    See how I quilted Color My World and the added surprise quilting in Wendy’s border:

    https://bbquiltmaker.b...
  • Getting outer circle to lie flat
    Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
  • Great new way to see all the photos!
    Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.

    Open...
  • Color My World Pattern - Download Heads Up
    I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
  • Color my world — your finish here
    Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
  • Quilt is complete. Fun!
  • One World — This is Brilliant!
    Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
  • Loading...
  • No more items.

A good iron

Collapse
X
  • Time
  • Show
Clear All
new posts

    #16
    i've been searching the internet and the local second hand shops for an old iron like the old jura my mom hand when i was a kid... everyone tells me that they got rid of theirs just a little while ago... :x :x :x
    i'd love the vermont country store one - but... i need 220 V and it's awfully heavy and expensive to ship to europe
    my main problem with the "new" irons is that they ALLLLLLLLLL have a safety that switches them off when they're not moved for a couple of minutes - drives me nuts when i'm paperpiecing or doing other stuff where i'm switching from the sewing machine to the iron and back all the time...
    so i'll keep searching through those second hand shops and asking friends, neighbors, friends of friends if they or their mom still have one hanging about...
    those irons were much hotter than the steam ones and NO SHUT-OFF :wink:
    Lotti, Kuessnacht - Switzerland

    Comment


      #17
      Like many of you I have Rowanta (I am on my third and yes, they can leak). And, like many of you I wanted a dry iron that stays on. I thought I would stop at the Vermont Country Store this summer while on my quilty vacation and purchase one. However, while antiquing in PA yesterday I came across this beauty. She vintage, small (about 8") and heavy (about 3 pounds) has no steam and no auto shut off and she sure is shiny and pretty. I had to take her home with me...

      Barbara

      Hey Dawn! Thanks!!
      Lotti, Kuessnacht - Switzerland

      Comment


        #18
        Hi ,I have a Bosch iron and the steam works really well and doesn't leak through the soleplate, the only problem is that it leaks at the handle and I iron with a handkerchief tied around it, other than that it's a great iron
        Anne

        Comment


          #19
          Lotti, check out the Digital Velocity. It has the timer override. And you don't need to put water into it if you don't want to, just use it dry.

          I don't know if they have a European distributor but it's worth looking into.

          Comment


            #20
            I had an iron with a removable water tank that lasted for years. It never leaked and I could remove the tank when I didn't want steam (it gave me steam even when I had the steam turned off) but it eventually quit getting hot. So now I'm using my backup irons which are all inexpensive. The first one lasted about 2 years, only leaked when it turned itself off and I wasn't paying attention. I learned to check to see if the light was on. When that one gave out I tried another one but it did leak and when it turned itself off I had to unplug it and plug it back in. That was getting tiresome so for now it is not being used. I had 1 more backup iron, a Proctor-Silex Model 17135. That's the one I am using now until I come up with something better. So far I haven't had a leakage problem, but occasionally some clean water comes out of the top. Most of the time the steam works correctly but after it's been on for awhile it sometimes quits. I've found that if I switch it back and forth between dry and steam or turn it off and back on it gives me steam again. And it doesn't turn itself off which is not always a good thing. I'm always careful to unplug it when I'm through. Of course I do that for the ones that turn themselves off too. I like an iron with an edge that's not too rounded and has a fairly sharp tip. Most of the expensive irons I've looked at have a thick edge and a round tip. That's why I'm still waiting for the perfect iron.

            Comment


              #21
              I have a very cheap iron that NEVER gets water in it. that way I can leave it on for most of the day and not worry about it. They usually last for about a year or so, but at under £5 (around $8, I think), who cares???? If I want steam, a quick squirt with a children's garden spray does the job.
              I do use the family iron for yardage but otherwise, I pay my teenager to do my clothes and her little sister's....

              Comment


                #22
                I'm with everyone here about the very poor quality of irons these days. I've been using a T-Fall iron over the past few years. They are available at Sears and at Amazon. I've never had a leaking problem with this particular brand. I just don't think the iron gets as hot as it should. How about someone in America making a great iron -- there's sure a market for it. Who know's perhaps some jobs could be created.

                Comment


                  #23
                  I was looking at a tutorial from the Missouri Quilt Company and the iron that they are using is an Oliso iTouch Professional. Has anybody used one of these? They are only $199.00 :!: Thinking of getting two, one for each hand. :roll: I wonder how long they will last?

                  Comment


                    #24
                    Hi Rita -

                    My current iron is an Oliso, but not the professional. It's a lower end (somewhere around $170). I've had it less than a year and it has several problems:

                    - it leaks out of the front hole fairly regularly.
                    - the automatic shutoff sometimes works, sometimes doesn't.
                    - just last week the little feet that come down from the sole plate decided to not go up for some reason. power-cycling fixed this but I've turned off that feature now since the iron can't be used if the feet won't retract.

                    My irons get a lot of use and they all end up failing pretty quickly. It seems like I have them on all of the time since I do a lot of piecing, so I'd estimate that my yearly usage is more like 5 or 6 years of usage by a "normal" person. But you probably have your iron on as much as mine. I also love steam and use the steam except where inappropriate like paper-piecing or starching applique. I'm waiting for this one to completely die, then I will move to my iron-in-waiting (a digital something, forget the name). I probably won't buy an Oliso again unless I see a really good deal on one.

                    I know others who swear by Oliso, so this is just my experience.

                    Nancy

                    Comment


                      #25
                      Like you Nancy I have my iron on most of the time so they tend to wear out pretty quickly. I have had two irons die in the last week! And the replacement I got is such crap that I can see that it's not going to last much longer either. I have a great little travel iron that I got years ago (so it doesn't have steam at all) which I use when I am piecing with a spritzer bottle to hand. I recently bought a new travel iron with a "shot of steam" but as soon as I tried to use the steam it began to leak. However, I am now using it without the steam and it's great. I think the elements just wear out because we quilters have them on so much of the time. I just can't believe that I would get long enough out of any iron to warrant paying $199.

                      Comment


                        #26
                        Personally, I would not buy the Oliso, Rita. I have heard numerous quilters comment that the self risng and lowering legs give out way to quickly.

                        You are probably best served by getting cheap irons, not using water/steam in them, and just using Best Press or a garden spray bottle with water instead. They won't last long, but at US $10 - $15, they are not expensive to replace 2-3 times a year.

                        I too am waiting for an iron made to quilting specifications: NO leaks, very hot, good weight, auto shut off override. The closest I have seen to this is the Digital Velocity I mentioned in a previous post... but they don't seem to make it for 220 usage. Can an iron be plugged into some kind of converter??

                        Comment


                          #27
                          Originally posted by heartnsoulquilts
                          The closest I have seen to this is the Digital Velocity I mentioned in a previous post... but they don't seem to make it for 220 usage. Can an iron be plugged into some kind of converter??
                          I'm not sure that I am understanding your question. Here in the US we plug our small appliances into 110. Why whould you be plugging yours into 220? Or, is the country on your profile not where you live?

                          Anyway, yes! there is a converter, or step-up, step-down device. My daughter bought a stroopwaffle (very Dutch) machine for me in Holland (220V), and my DH bought such a device for me. It is a very heavy, around 5" cube, and will convert 110 to 220, or 220 to 110. If you are seriously interested in this, I will send a picture to you, and try to get more information for you. They are not cheap! But if it allows you to get any electronic item that you wish, then it is well worth it!

                          Dawn
                          In beautiful Northwest Montana

                          Comment


                            #28
                            Dawn, I am in the US, but I was thinking of Rita, in Ireland and Lotti, in Switzerland, I believe. Lotti posted this inquiry first, and so many others have now commented too. Seems many of us are not happy with our irons! And with the 220 volts in Europe, it seems even more of a problem!

                            I suspect Lottie and Rita would be interested in the convertor thing-a-magic you have (that is the technical term for it!! LOL) Do you think it could handle the heat and constant cycling on and off of an iron?

                            Comment


                              #29
                              Originally posted by heartnsoulquilts
                              Dawn, I am in the US, but I was thinking of Rita, in Ireland and Lotti, in Switzerland, I believe. Lotti posted this inquiry first, and so many others have now commented too. Seems many of us are not happy with our irons! And with the 220 volts in Europe, it seems even more of a problem!

                              I suspect Lottie and Rita would be interested in the convertor thing-a-magic you have (that is the technical term for it!! LOL) Do you think it could handle the heat and constant cycling on and off of an iron?
                              Thank you for clearing this up for me! I skimmed through the thread very quickly, and do believe Lotti is looking and Rita has found one that works for her. Regarless, there are a lot unhappy quilters around the world, when it comes to their irons. The step down converters (transformers) come in many different wattages, and are as cheap as around $10. I would certainly NOT get a cheap one, just for the reason you brought up - - the continual cycling on and off. My stoopwaffle iron is contiually maintain a certain temp, so will heat up and cool down. Mine is a 1000W (and more $$ of course) and can handle it. If I were anyone wanting an iron that only comes in 110V I would research (Google) Step Down Converters/Transformers. I hope this information helps those of you who are in need of it!

                              Dawn
                              In beautiful Northwest Montana

                              Comment


                                #30
                                My expensive Rowenta has been leaking and it recently quit heating enough even to iron fusible on fabric!!! It's only a couple of years old and causing me a lot of grief.

                                Good news! I did find a wonderful new red mini- iron at my LQS a couple of weeks ago and I just started using it last week. I LOVE IT! It is very light and compact and it heats so good. The ladies at my LQS highly recommended it over another brand of compact iron that offered steam. I was fusing blocks today for machine applique and they pressed up beautifully with 'Lil' Red' and Best Press. Normally I have problems with my back & shoulders when I am sewing, but since I started using it, I have not had those problems and I believe it is because I'm not constantly lifting the standard size iron. It can easily be packed for classes & retreats and since it is not a steam iron, you don't need to worry about it leaking

                                My 'little red iron' is called Kandi's Handi-Iron. It was $40.75 at my LQS. I looked on Amazon and did not find one, but they had one on eBay. Here's the link if anyone is interested in checking it out: http://www.ebay.com/itm/Kandis-Handi...item3cc138c426.

                                "Don't cry because it's over. Smile because it happened."...quote courtesy of Dr. Seuss

                                Comment

                                What's Going On

                                Collapse

                                There are currently 2317 users online. 348 members and 1969 guests.

                                Most users ever online was 20,162 at 03:06 PM on 02-20-2024.

                                Forum Stats

                                Collapse

                                Topics: 8,272   Posts: 155,410   Members: 26582   Active Members: 1,826  
                                Welcome to our newest member, [email protected].

                                Latest Topics

                                Collapse

                                • MONTH 1 Share Your Progress
                                  Barbara, I was wondering if you would be willing to post your block photos for the month each month as we get started....
                                • MONTH 12 -- Show Your Completed Top Here!
                                  Beautiful!
                                • MONTH 12 -- Show Your Completed Top Here!
                                  Homeward bound. The long journey finally done...
                                • MONTH 1 Ask Questions Here
                                  Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
                                • MONTH 1 Ask Questions Here
                                  I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
                                • UPLOADING PHOTOS to the FORUM
                                  Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
                                • MONTH 1 Share Your Progress
                                  Please use this TOPIC to share your progress with Laurel Ridge.

                                  There is a STICKY TOPIC that explains how to...
                                • MONTH 1 Ask Questions Here
                                  Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
                                • FABRIC REQUIREMENTS are now posted
                                  Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
                                • FABRIC REQUIREMENTS are now posted
                                  Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
                                • NEW BLOG Up—How to be READY!
                                  Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
                                • NEW BLOG Up—How to be READY!
                                  Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
                                • Start a STITCH GROUP
                                  A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
                                • Loading...
                                • No more items.

                                Trending

                                Collapse

                                There are no results that meet this criteria.

                                Working...
                                X