Quilting Forum

Announcement

Collapse
No announcement yet.

Latest Forum Posts

Collapse

  • MONTH 1 Ask Questions Here
    Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
  • MONTH 1 Ask Questions Here
    I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
  • UPLOADING PHOTOS to the FORUM
    Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
  • MONTH 1 Share Your Progress
    Please use this TOPIC to share your progress with Laurel Ridge.

    There is a STICKY TOPIC that explains how to...
  • MONTH 1 Ask Questions Here
    Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
  • FABRIC REQUIREMENTS are now posted
    Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
  • FABRIC REQUIREMENTS are now posted
    Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
  • NEW BLOG Up—How to be READY!
    Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
  • NEW BLOG Up—How to be READY!
    Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
  • Start a STITCH GROUP
    A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
  • Eq8?
    It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
  • Eq8?
    Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
    Thanks...
  • FABRIC REQUIREMENTS are now posted
    My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
  • FABRIC REQUIREMENTS are now posted
    Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
  • FABRIC REQUIREMENTS are now posted
    Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
  • FABRIC REQUIREMENTS are now posted
    Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
  • PICK A PETAL -- Show Your Finished Top Here
    Oh, how darling, So original. I love it.
  • FABRIC REQUIREMENTS are now posted
    Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
  • Loading...
  • No more items.

Trending Forum Posts

Collapse

  • Happy Dance! I won ribbons!
    Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
  • What I learned
    Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
  • Late at this but having difficulty
    Hi There,

    I hope you can help me. I know I'm very late in getting to this point but life is finally allowing...
  • Adding house numbers
    I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
  • Ahhhhh.. almost done! Have a question!!
    Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
  • My Colorful World With Parks by Duffy
    My quilt is finish
  • Printing for paper piecing question
    For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
  • Paper piecing color my world…anyone else?
    I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
  • Video Access
    Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
  • New to The Quilt Show
    I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
  • How to download pattern?
    I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
  • Quilting color my world
    See how I quilted Color My World and the added surprise quilting in Wendy’s border:

    https://bbquiltmaker.b...
  • Getting outer circle to lie flat
    Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
  • Great new way to see all the photos!
    Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.

    Open...
  • Color My World Pattern - Download Heads Up
    I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
  • Color my world — your finish here
    Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
  • Quilt is complete. Fun!
  • One World — This is Brilliant!
    Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
  • Loading...
  • No more items.

A good iron

Collapse
X
  • Time
  • Show
Clear All
new posts

    A good iron

    Has anyone found an iron that doesn't leak? I am so frustrated - both my Rowenta and my Eliso leak - it's maddening.

    #2
    Originally posted by bean53
    Has anyone found an iron that doesn't leak? I am so frustrated - both my Rowenta and my Eliso leak - it's maddening.

    Read your instructions. When I put even just a little too much water in mine it leaks too, so I pour out whatever water is left and I carefully measure to refill.


    It's Not What You Gather, But What You Scatter
    That Tells What Kind Of Life You Have Lived !

    Comment


      #3
      Or you could do what Ricky suggested. He says that all irons become incontinent so the thing to do is not to use the steam but have a spritzer bottle beside the iron and use as and when necessary. I go through irons at a ridiculous rate because I can have them on for long periods of time while I am piecing. Yesterday I bought the dinkiest little travel iron that has a jet steam button so most of the time it is dry except when you press the button. It was only €11 but I really like it because it is small, has a folding handle and that shot of steam is just perfect.

      Comment


        #4
        Dry Iron and a squirt bottle full of water is the answer.

        http://www.vermontcountrystore.com/s...-app-02-p-app2

        Comment


          #5
          Barbara's recommendation from Vermont Country Store is the iron I've used for the last three years. It is wonderful, gets very hot, and because there are no steam holes, doesn't mark the fabric. Great product and not expensive.

          Comment


            #6
            Originally posted by bar7700
            Dry Iron and a squirt bottle full of water is the answer.

            http://www.vermontcountrystore.com/s...-app-02-p-app2
            Looks good, but two things came to mind. While reading about it I was wondering how many of you actually "iron your plush towels" as stated? :shock: (Or any towels, for that matter!) And, what happens when I want to use Steam-A-Seam? My iron was cheap and I got what I paid for! It has a mind of it's own and steams only when it feels like it, and not when I want it to. So, I will be watching this thread, too!

            Dawn
            In beautiful Norhtwest Montana

            Comment


              #7
              I've decided that I will just be going through irons frequently. I figure that my iron is turned on as long in a year as a non-quilter's iron will be on in a lifetime, so that's just a part of my quilting expenses. I really like using steam rather than a dry iron with a spray bottle, so I'll just keep going as I have. Of course, if I hear that someone has found the perfect steam iron, I'll be getting one of those for myself immediately! To try to take some of the stress off of my steam iron, I also keep my old leaky steam iron and just use that one for dry applications, never putting water in the old iron. That way I have a dry iron for things like paper-piecing and applique and can use the newer iron (that might leak a little when it's on its last legs) whenever water is okay. And I watch for sales on irons so I can buy a new iron at a cheaper price before it becomes critical. Right now, I have a "digital" iron that I bought on sale at Joann's waiting in the wings for my Oliso to finish dying before I break it out. The new iron claims to last longer because it automatically monitors the steam, only turning that on when the iron has become hot enough and things like that. But I won't know how good it really is until my Oliso dies.....

              Nancy

              Comment


                #8
                I have bought expensive and cheap irons and I do not notice a difference. The steam is still contrary and only comes out when it wants to - usually when I stand it upright again after pressing something :roll: As for ironing towels? Well I find that when I have finished ironing all my lingerie, socks, nylons, my husbands 'smalls' and socks, all my table cloths and napkins and the drapes well I just don't have the time to worry about towels, or shirts or bed linen or .....please feel free to add something yourself :lol: :lol: When I bought my latest travel iron my sons only comment was "for somebody who doesn't iron anything you sure buy a lot of irons"! :mrgreen:

                Comment


                  #9
                  No, I don't iron plush towels, or much of anything else either, except quilt fabric. I have an older steam iron that I use if I absolutely have to. I do paper piece a lot, though, and really like the fairly sharp point on the Vermont iron and the fact that it gets "hotter"(is that a word?!) than my steam iron.

                  Comment


                    #10
                    Dawn, what's that lovely looking quilt behind you? I kept meaning to ask and kept forgetting :roll:

                    Don't answer that, I just found the post where you said that you won it in a raffle and it's a Judy Neimeyer quilt. It looks really lovely. Lucky you.

                    Comment


                      #11
                      Thanks, Rita! Funny thing, though, this quilt guild has quilt hangers with fabric at the tops of the frames, so they pin the quilts up for shows and the fair. So it has no sleeve! I finally got the rod up in quilt room last weekend, and now have to sew on a sleeve. A 110" sleeve! In 4 parts, because of the size of the quilt and brackets needed to hold up the rod. I think sewing on sleeves is my least favorite thing to do on a quilt.

                      Dawn
                      In beautiful Northwest Montana

                      Comment


                        #12
                        I have also given up on steam irons and finally bought the dry iron from Vermont Country Store. I often use Best Press so this does the trick. And it does not turn itself off, which can be good or bad. LOL I have 3 other irons, all steam irons, and all leak. My favorite 'cheap' iron is a Black and Decker, but even that started to leak too.

                        FWIW, quite a few well known quilters (Pat Sloan, Judy Laquadara and others) do love the Digital Velocity. It is not cheap, but supposedly does not leak. And it has an override of the turn off timer, so you can set it to stay on if you'd like. I have never used one, but have read good reviews of these from quilters online.

                        Comment


                          #13
                          Interesting. My "reserve" iron is the digital velocity, so I'll be excited to try it when I get to it! I don't remember it being any more expensive than my Oliso or Rowentas.

                          Comment


                            #14
                            I have used the dry iron from the Vermont Country Store for the last few years, as a result of a recommendation here in the TQS Forum (Margo, I think, but not sure!) and really like it for paper piecing especially, or anything that has been starched before piecing. I do still use my steam iron occasionally, but the occasional "splurt" of incontinence makes me think twice! Nancy

                            Comment


                              #15
                              I have a Rowenta that also leaks. I keep an old towel folded at the end of my ironing board to catch the drips. I have found that once the iron is hot it quits leaking until it cools down again. So I just empty the water out when I am finished. Usually it has been used enough that it is empty anyway. I also have an old Black and Decker light and easy that does not leak. I just prefer the weight of the Rowenta. I also keep a spray bottle of water handy if I just have a little ironing to do. Maybe a too wrinkled blouse or skirt. Does anyone really iron undies, socks, etc.? I don't even iron pillowcases anymore. Not enough time and I am retired, so who cares? :lol: Maybe I should buy myself a red hat. :lol: :lol: I am refering to the actual poem, not the groups of distinguished ladies.

                              Comment

                              What's Going On

                              Collapse

                              There are currently 2160 users online. 259 members and 1901 guests.

                              Most users ever online was 20,162 at 03:06 PM on 02-20-2024.

                              Forum Stats

                              Collapse

                              Topics: 8,272   Posts: 155,407   Members: 26577   Active Members: 1,813  
                              Welcome to our newest member, [email protected].

                              Latest Topics

                              Collapse

                              • MONTH 1 Ask Questions Here
                                Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
                              • MONTH 1 Ask Questions Here
                                I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
                              • UPLOADING PHOTOS to the FORUM
                                Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
                              • MONTH 1 Share Your Progress
                                Please use this TOPIC to share your progress with Laurel Ridge.

                                There is a STICKY TOPIC that explains how to...
                              • MONTH 1 Ask Questions Here
                                Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
                              • FABRIC REQUIREMENTS are now posted
                                Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
                              • FABRIC REQUIREMENTS are now posted
                                Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
                              • NEW BLOG Up—How to be READY!
                                Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
                              • NEW BLOG Up—How to be READY!
                                Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
                              • Start a STITCH GROUP
                                A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
                              • Eq8?
                                It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
                              • Eq8?
                                Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
                                Thanks...
                              • FABRIC REQUIREMENTS are now posted
                                My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
                              • Loading...
                              • No more items.

                              Trending

                              Collapse

                              There are no results that meet this criteria.

                              Working...
                              X