Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Barbara, I was wondering if you would be willing to post your block photos for the month each month as we get started....
-
Beautiful!
-
Homeward bound. The long journey finally done...
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Freezer Paper Sheets
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Freezer Paper Sheets
Hello!
I have been increasingly (and joyfully) sucked into projects that require freezer paper, and am growing weary of the "battle of the curl." :wink: In other words, I am tired of fighting with my largish grocery store roll and so looking with hopeful eyes at those 8.5 x 11-inch sheets that feed into one's printer and are packaged to be nice and flat.
I see several varieties online but am not sure what a good choice would be. Some reference running through inkjet printers, but I only have laser printers at my disposal. Some recommendations and feedback would be lovely.
Thanks!
Taree NSW - Australia
My motto in life: live by the three GGG’s - be Grateful, be Gracious, be Gorgeous to yourselfTags: None
- IP
-
April,
A couple of things...
Freezer paper just doesn't work in a laser printer, but it does work quite nicely in an ink jet. However, if you take your grocery store freezer paper, cut off a length that seems about right to work with, and iron it..even spray starch it (on the non-shiny side) lightly and iron it, cut it with your duller rotary cutter into printer sizes, it works fantastic in your ink jet printer (or keep it larger for larger projects and work with pencil). It shrinks a little, too, so if you do that before either printing or drawing on it, it won't distort your pattern. I use two layers of grocery store freezer paper ironed together. Much cheaper than the precut stuff and no rolling.
But if you buy a new printer so you can print on it, I recommend getting one that will accept large sheets. Mine will take something bigger than the 11 x 17 inch sheets (that's as large as I have used so far). It then is great for things like printing on fabric, label printing, pattern printing, etc. With the right inks and the right pre and post treatment, printed fabric from an ink jet printer is permanent and doesn't wash out. I've seen some discussion on the forum saying it does, but I've seen no fading even after four or five washings (I use fabric I purchase at Electric Quilt...it seems the nicest quality and is already pre-treated). I also print foundation paper in mine...don't know what I'd do without my HP inkjet and my grocery store freezer paper.
"Neglect not the gift that is within you..." -1 Timothy 4:14
Betty Jo
- IP
Comment
-
Great tips, thank you! Okie doke, NO laser printers. Got it (makes perfect sense, now... duh.) Thankfully, I do have a very nice lightbox, so printing my patterns on regular paper and transfering to a sheet of freezer paper would not be a big deal.
So... back to my original question, has anyone found 8.5 x 11 sheets of FP that they like? There are several brands with varying reviews, according to my research so far.
Thank you much, again! :mrgreen:
"Neglect not the gift that is within you..." -1 Timothy 4:14
Betty Jo
- IP
Comment
-
Originally posted by heartnsoulquiltsI think the package of 8.5 x 11" sheets I have are made by Jenkins. They work fine.
Here's a link: http://www.cjenkinscompany.com/C_Jen...apersheets.htm
It's Not What You Gather, But What You Scatter
That Tells What Kind Of Life You Have Lived !
- IP
Comment
-
If all you have is a laser printer, iron a piece of fabric to the freezer paper and run it through that way. I use my laser printer all the time to print foundations onto muslin. I iron the muslin to freezer paper so it will go through the printer. Each sheet of freezer paper works for 6 or more muslin pieces.
- IP
Comment
-
I've read that if you cut freezer paper to 11 x 17, fold it in half with the shiny (the waxed sides) together with a piece of regular paper in between, it can be fed into a laser printer, using the manual feed tray and I would use the transparency setting as the machine would know plastic is involved. Laser printers have long been able to run transparencies, which is also plastic (albeit no glue). I will keep my fingers crossed to see if this works.
Pat
- IP
Comment
-
Originally posted by FranceslovesfabricIf all you have is a laser printer, iron a piece of fabric to the freezer paper and run it through that way. I use my laser printer all the time to print foundations onto muslin. I iron the muslin to freezer paper so it will go through the printer. Each sheet of freezer paper works for 6 or more muslin pieces.
"Neglect not the gift that is within you..." -1 Timothy 4:14
Betty Jo
- IP
Comment
-
Barbara, I was wondering if you would be willing to post your block photos for the month each month as we get started....
-
Beautiful!
-
Homeward bound. The long journey finally done...
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2278 users online. 330 members and 1948 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,410
Members: 26582
Active Members: 1,826
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment