Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
-
Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
-
Oh, how darling, So original. I love it.
-
Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Bernina Bias Binder Attachment
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
I have this attachment. I've only used it a little bit. It works *fantastic* when you don't get out of alignment, but if you get off a little bit, boy it's hard to get back on the right track! That probably takes practice more than anything, and I just haven't worked with it enough.
One thing I haven't seen yet, and I think is desperately needed, is how to handle corners. I bound a quilt with it, it's actually one of mine in the gallery, the Crazy Birds. What I ended up doing as I came to an edge was to run the binding off the edge a little bit so that I would have enough to turn to the back and stitch down. It wasn't the most elegant or even remotely pretty thing to do, but it was a quilt full of experiments, and it just belonged there!
I don't know how much it cost, I got it as a gift, so I can't comment on the value. For what I paid for it it's a great value! :wink: I will also use it in some clothing as well, it's great for making button loops, spaghetti straps, tie-backs, and that sort of thing.
HTH
Lisa
Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
- IP
Comment
-
Yep I bought one two weeks ago. There are also a couple of videos on youtube showing how to do mitered corners with it. I've tried on scraps and I"m not ready to do it on a quilt yet. I have so far bound an apron (all curved edges) and it was a breeze, came out more professional looking than anything I've done yet. And I've also bound two kiddie quilts that I made, but since I'm not confident yet of the mitered corners I just rounded the corners. It was super fast adn so much easier. No burned fingers from trying to fold and iron all that binding I cut. I got the #88 bernina binding attachment. Love it so far! Am probably going to give one to my mom for Christmas.
Coast of South Carolina USA
Sewing/Quilting on my Viking Sapphire 870
- IP
Comment
-
I did it! I finally mastered the mitered square corners with the Bernina binder 88 tool. It took a lot of scraps. I saved the edges of quilts that I had quilted, so I'd have a lot of sandwiches to practice on. I tried angles too. It's all possible. Just practice practice practice. I think I did all the corners on a bunch of triangles and long rectables, maybe 30-40 of them all told. I got the full idea after about 4 peices (maybe a dozen corners), but still had messups. So kept practicing. Once I "got it" it isn't too hard. It's just taking lots of care and one single straight pin. I found that finger pressing and kinda rolling the the folded binding (folded into the miter shape) back and forth a little bit helped to give it a bit of 'memory'. I also damped it a bit to help set it. Not a lot. just licked the tip of my fingers and did the sqishy squishy mash roll it back and forth thing.
My biggest problem was remembering to keep the flat binding aligned in the binder when I pulled it through the attachment in order to get enough space to hand pinch/roll/mash the folded miter corner. If I got the flat binding out of whack, then pulling it all backwards through the attachment was difficult. But if I kept it flat, it was okay. (I ended up having the trailing end of my binding laying up over the top of my machine so the weight of it was help up and it wouldn't pull it sideways/downwards in the binder)
Sounds hard, but once you get it.. it's not really that hard.
This binder really does work and it will do 60 and 45 degree angled corners too if you want. 90 degree corners really aren't that bad. But you do have to pin, maybe dampen it a little to help the finger pressing to get it to stay, holding with tweezers helps too. and PRACTICE. You won't do this off the bat the first time. But it will save you hours of time if you make a lot of quilts and baby stuff.
- IP
Comment
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2042 users online. 284 members and 1758 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,407
Members: 26576
Active Members: 1,811
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment