Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
-
Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
-
Oh, how darling, So original. I love it.
-
Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Inked on paper stuck under quilted stitchery
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Inked on paper stuck under quilted stitchery
I drew a design onto paper, then scanned it, printed it on my inkjet, and pinned it in place on top of my quilt. I stitched along the lines, and then tore off the paper, but lots of the paper was caught under the stitches. So I then got the bright idea to spritz it to soften the paper, but when I did, I noticed the ink was running. So I tossed the quilt into the washer with Synthropol and when it came out, alot of the paper had washed away, but now there was a bunch of blue bits of paper under the quilted stitches. I've tried picking the paper manually from the threads, using an old toothbrush, and even tried taking the quilting out, but lucky there isn't a stain on the fabric, just lots of blue paper under stitches. Is there something I can do, like wash it once more, soak it in water to dissolve the last bit of paper? This area is only one block, and it is about 8 or 10 inches square. Needless to say, I will not do that again!Tags: None
- IP
-
Tweezers is somtimes the only way to go with those pesky little paper left behinds. I've also used blue masking tape or a sticky lint roller to pick up all the little paper demons.
I use 'Golden Threads' paper quite often in my quilting.
It tears out the most cleanly....although all paper will leave stubble behind.
I usually trace the quilting design onto the paper with either a graphite pencil or a blue wash away marker. This does two things, you don't have the inkjet bleed out (which always happens) in case you miss some paper crud, and second is, you practice the quilting design with your hands first and that improves your quilting. Sometimes I do run through the inkjet printer, but then I make sure all paper is removed before final wash. If you check my profile, the quilt 'Plain Cloth' was quilted with this technique....and there was alot of paper stubble to remove.
Hope this helps...I have soooo been there.
Mary S
- IP
Comment
-
Thanks for all the tips, and I've just about got the idea, take it back to the water, and see what a good soak, will do, because most of the paper is now picked out just a few places and it makes my cream thread look light blue in those places. I do know enough not to do this again. I'll let you guys know how it turns out. Have a Great Labor Day weekend.
- IP
Comment
-
Now that I've just about taken the paper out, I do notice some pinkish colors in the fabric which must have been some of the ink. Oh well, just as well, I will just piece a new cream colored fabric on top and quilt away once it is all dry enough. Since it is so large and has so many large rose sprays on it in the alternate blocks, the eye is really looking at them, not the cream background fabric anyway. I just watched Mary Mashuta on TQS, Episode 213 – TQS Road Trip - Part Two, stitch around a plastic template of shelf paper, and might try that, but I don't trust the markers enough to try them on this. My luck it would make a mess. 4 hr quilt, ha ha ha!javascript:emoticon(':lol:')
- IP
Comment
-
Take a look at Ricky's DVD Grand Finale ... he does much of his quilting from the reverse / underside of the quilt top. He uses invisible wash-away thread that dissolves in water.
He put thin polyester type stabilizer paper under neath the top. He considers the sewing of the templates underneath is preliminary practice he uses to perfect his skills before he quilt the top for real. When the quilt is finished he then "soaks" the quilt getting rid of the washable thread. The thin stablizer is in the quilt as a batting.
The DVD is sold on his web page and I thought it was worth the money to learn new technique of domestic machine quilting.
I do not know if I will ever do it as is is very involved, but I really enjoyed watching the DVD. I frequently have it on while I am sewing.
- IP
Comment
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2167 users online. 266 members and 1901 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,407
Members: 26577
Active Members: 1,813
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment