Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
-
Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
-
Oh, how darling, So original. I love it.
-
Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
new empty nester moves to Virginia!
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
new empty nester moves to Virginia!
Hi, I am new to all this forum and blogging. My son has been helping me before he leaves for college. We moved to Burke, Virginia from San Diego, California, in July, and I'm wondering if anyone knows of quilt shops in and around the area, quilt guilds, quilt shows, anything! I have been quilting since 1989, was a Navy wife, raised three boys who are all in college this year, was a librarian and reading teacher in San Diego, and now that my husband has a job as a judge in D.C. I find myself retired, with an empty nest and wanting to quilt full time. Anybody out there near here??
Joan in Burke, VATags: None
- IP
-
Oh Joan you are most fortunate. You landed in a quilt maker rich environment. I moved a couple of years ago from there and still am in mourning. Here's a site for a big guild and they have a Burke chapter.
http://www.quiltersanonymous.org/
And here's a great quilt friendly fabric store that has 3 stores in the DC area. They like to hang a mini-show each month of local quilters
http://www.gstreetfabrics.com/
I know you'll be hearing shortly from the TQS members who see this Forum entry soon.
- IP
Comment
-
Check with Pat Sloan http://patsloan.typepad.com/. She's in VA and could be a good resource for you.
Jinny Beyer's shop is also in VA http://www.jinnybeyer.com/.
There is a list somewhere, I don't have the link any longer, for guilds in VA.
Happy Quilting!
TeriTeri
Quilting is a Beautiful & Complicated Art!
- IP
Comment
-
Hey Joan, welcome to VA! I'm in Fredericksburg which is maybe 25 minutes south of Burke. Patti got it right, G Street Fabrics is a wonderful place, although I'm somewhat broken-hearted that they closed the Potomac Mills store :cry: which was closest for me. Quilters Unlimited is a guild that has branches all over NoVa, not as far south as me but I'm pretty sure there's a Burke chapter. QU does a terrific show each year I always try to get to. So jealous of your opportunity to quilt, quilt, quilt!
FlorenceTeri
Quilting is a Beautiful & Complicated Art!
- IP
Comment
-
I am grateful for all the replies I have been receiving! I don't know how to answer each one, so I'll just say to Happycampbell: I have no real clue how far you are from Burke, I grew up my teenage years in Annandale, which is near Burke, but have been out of the area for the 27 years we have been married. It is so changed! I think I am north of you, up by DC. I will check out the QU and other sites you all left for me. right now we are in Steubenville, Ohio, dropping son #2 at Franciscan U. I will miss him! But we are closer than we were when we lived in California! Only a 5 hour drive! Maybe I will meet some of you when there is a quilt show in town!
Joan
- IP
Comment
-
Hi Lynn,
we are originally from NoVa, and decied to stay in California when he retired at 15 years, he was one of the few with early out. Then the kids decided to grow up, the parents decided to get old, and we thought it would be a good idea to move back closer to family on the east coast! So he applied for many many jobs, and was hired by the Labor Dept as an administrative law judge, and it's his favorite job! And we will be closer to two sons: one in Ohio and one in Indiana. And I will be better able to make the trip to Florida to care for my parents!
Joan
- IP
Comment
-
Originally posted by joanraeAnybody out there near here??
Joan in Burke, VA
p.s. when did G Street in Potomac Mills close? [sob] They saved my butt last year when I needed 10 yards of a fabric that I couldn't get locally and didn't want to chance with different dye lots. Needed it right then, couldn't wait for mail order. Was worth the drive.
Robin in Short Pump
- IP
Comment
-
Hi Robin,
My sister-in-law lives in Short Pump! Otherwise I'd never heard of it! We have been out of the area for 27 years, Navy tours then settled in CA after he retired at 15. So I don'tknow about Potomac Mills! We have only been here since July 5th and I'm still learning my way around. I plan on checking out the Quilt Patch in Fairfax tomorrow!
Joan
- IP
Comment
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2105 users online. 282 members and 1823 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,407
Members: 26576
Active Members: 1,811
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment