Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Is it possible to know the width of the flower border fabric? I would like to cut it before cutting the 12” blocks for...
-
I would like to cut my border before I cut the 12” squares. Is it possible to know the border dimension of the flower...
-
Do you think if I use the color, as in a single solid color for each one, indicated in the column marked color on the fabric...
-
This is a test...
-
Month 3 completed! I have put 1/4 on the design board
-
That would work great too. I don't have one and the smaller size half square triangle Bloc Loc I do have has gone missing,...
-
Barbara I am using the Bloc Loc 5 1/2" half square triangle to square up my squares. It takes a lot less time. Thanks...
-
I had to finish another BOM before beginning Laurel Ridge. I am now on my way. I chose to use Jane Austen fabrics since...
-
Gloria, I’m glad I’m not the only crazy one. I am doing both color ways too. I needed a spring quilt for our bed and...
-
I see there is a column indicating the overall color of the fabric. If I do mine in solids, can I use that column as an...
-
I used a combination of fused raw edge applique with blanket stitch (regular sewing machine) and embroidery (embroidery...
-
Gorgeous - you did an amazing job!
-
I made the mistake of starching ALL the fabrics. I could not tease, cajole or otherwise force the shapes into submission...
-
Thank you so much for sharing. I'm using your idea!!!
-
I love this block as an alternative to the appliqué. Great job.
-
Is there a way to delete items in my wish list. I've got items there that I have purchased and don't want to purchase again,...
-
These were fast to make. I made 16 of the ones with the stripes and gingham and 8 of the other 2. Since I could only get...
-
Since I'm working with fat quarters, I didn't have enough of one of the fabrics to make them all the same so I made them...
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Laura Nownes
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Beautiful blocks Marilyn!
I've been piecing my blocks using my Necchi Nora from the 50's. It doesn't have a needle down position but I got used to putting the needle down when I stop sewing. Doesn't have a knee lift although the knee "thingy" can be used to operate the machine instead of the foot pedal. I have used a startie-stopie but recently I started using Bonnie Hunter's Leaders and Enders system which allows to work on 2 or more projects at a time. She just issued a new challenge, check it herehttp://quiltville.blogspot.com/2012/...challenge.html . Since I decided to use my reel blocks to make houses instead, I'm doing the 3" spools to make a border. The roofs of the houses will have the maker name and state(if from USA) or country (if from overseas). I'm planning on calling my quilt : TQS Neighborhood, the threads that connect us.
I use a good ald bamboo skewer as stiletto to hold fabric points and also as seam "undoer" (ripper). I don't like to cut the threads when un-sewing, I prefer to pull the stitches, that way I avoid the chance of ripping the fabric along with the stitch. The point in the skewer is sharp enough to pull the thread but blunt enough to not leave any marks on the fabric. :idea: :wink:
Last but not least. Still behind but here are my first 9 patch blocks. Besides working on the sampler, I'm using the leaders & enders to sew blocks (already cut) from another project that had been waiting since last yearops: :cry:
ops: and some lil' spools. Ha!!! one sneaked in the photo :lol: :lol: :lol:
- IP
-
Originally posted by crocus999Thanks for all your instructional comments. I don't have a machine that automatically does 'needle down', I do that myself (like the olden days!)
I have found that the startie-stoppie works better with straight-on stitching than with going in on those angles like the 45 degrees on the edges of the triangles. I found an old dowel the size of a pencil, and I sharpened it in the pencil sharpener, and I use that to hold down my points when coming to the end of the pointed angle. Seems to work.
Marianne
- IP
Comment
-
I have tried my hand at the Sawtooth Star block today. The Flying Geese units are not too bad but when I start to put the whole block together I find it gets distorted. I think I am too much of a novie yet to cope with the 2" squares in the cornersNo room for any mistakes and despite my best efforts and starched fabric I have 2 wonky blocks. They are almost the right size which is a step forward from the Yankee Puzzle blocks last week. I will continue to make Flying Geese units and try all the different ways to make them I have found so far but I think I will just put those units together to form blocks instead of making the stars
ops:
I am also really struggling with the thick seam I get when pressing the seam allowances towards the triangles - there is a lot less bulk if I press one towards the Goose which I did by mistake on one unit. Is there a particular reason why they should both be pressed towards the triangles?
Perhaps I should try to make a 12" star block to see if I am more successful doing that. Something to think about over night :!:
Off to dream of stars :P
Marianne
- IP
Comment
-
Got mine done tonight. Had to redo one flying goose as I managed to cut off the 1/4" allowance at the top. I will definitely be sewing these to the sashing with a very scant 1/4" . :roll: Marianne, these are not as easy as Laura makes them look. There is a lot to look out for but especially not cutting off your points and remembering that you need that 1/4" seam allowance at the tips. Good luck.
- IP
Comment
-
Marilyn and Rita, thank you for your input and encouragement. Annis' photos were very helpful. In the cool light of a very grey morning and a really close look at the morning I can see that it is indeed the corners that make my star blocks wonky.
I am actually pretty pleased with the Geese units which I made larger and cut down to size. Maybe I need to use stronger starch on the fabric that goes into the corner.
I know the blocks don't look like star blocks but I wanted a block that would blend more than stand out. I haven't done a design as such but have an idea in my head; time will tell if I can pull that off. It is funny, I have never liked sampler quilts – I made 2 in a class in the mid-80ties, one by hand and the other by machine, which put me off patchwork for a long time and I thought I would never do another! A couple of years ago I did some BOM and I was very, very careful of how I made them so they looked very co-ordinated. When I saw this class I really, really liked how the quilt looked and now I'm off on a tangent. You never know what happens once you start playing, do you?
Marianne
- IP
Comment
-
Marianne, you have taken the learning experience to a new level with all your experimentation with each block and I think that is the real value in doing this class. I applaud what you are doing, and by the way, I'm attracted to the colors of this block as well as the non-traditional shape you've given it. What you're doing and how you are documenting the experiences is inspiring!
- IP
Comment
-
Hi Marianne - I love your fabrics and how you are doing the colors! Both blocks look really good. In fact, the second one looks perfect. And the little bobble that I see in the first block will just be hidden in the seam allowance when the blocks are put together, so it doesn't matter. Good job!!
Nancy
- IP
Comment
-
Marianne - your blocks look fine to me. I even like the way you put the corner squares in, makes a whole new block!
I will try the little paper thing you suggested. I shall begin my star blocks today. Just have to go through my stash, as I hadn't pre-chosen the colours, just decided to use the stash. (although I bought other fabric, just in case) And, I keep rearranging the position of the blocks on the design wall. I hope I don't run out of background!
- IP
Comment
-
Thank you everybody! You are all so encouraging. I will go and cut more pieces for star blocks :wink: I have made up a stronger starch so the corners can behave like the rest; I think I got the recipe wrong for the second batch of starch I made and used on the darker fabric in the blocks.
Terrie, fingers crossed that the background fabric will "stretch" and suffice. I am using a fat quarter selection from years ago and adding some random solids left over from blouses and nighties I made a couple of years ago.
Marianne
- IP
Comment
-
Is it possible to know the width of the flower border fabric? I would like to cut it before cutting the 12” blocks for...
-
I would like to cut my border before I cut the 12” squares. Is it possible to know the border dimension of the flower...
-
Do you think if I use the color, as in a single solid color for each one, indicated in the column marked color on the fabric...
-
This is a test...
-
Month 3 completed! I have put 1/4 on the design board
-
That would work great too. I don't have one and the smaller size half square triangle Bloc Loc I do have has gone missing,...
-
Barbara I am using the Bloc Loc 5 1/2" half square triangle to square up my squares. It takes a lot less time. Thanks...
-
I had to finish another BOM before beginning Laurel Ridge. I am now on my way. I chose to use Jane Austen fabrics since...
-
Gloria, I’m glad I’m not the only crazy one. I am doing both color ways too. I needed a spring quilt for our bed and...
-
I see there is a column indicating the overall color of the fabric. If I do mine in solids, can I use that column as an...
-
I used a combination of fused raw edge applique with blanket stitch (regular sewing machine) and embroidery (embroidery...
-
Gorgeous - you did an amazing job!
-
I made the mistake of starching ALL the fabrics. I could not tease, cajole or otherwise force the shapes into submission...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 3238 users online. 596 members and 2642 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,301
Posts: 155,984
Members: 27126
Active Members: 1,849
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment