Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
-
Barbara, there is no topic heading for this yet. With the Bloc-Loc 1.25" x 2.5" Geese ruler unavailable, the...
-
Oh, how darling, So original. I love it.
-
Thank you for your quick response. One of the reasons I prewash is to shrink the fabric.
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
How to Be Successful with COLOR MY WORLD
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Originally posted by "Box2wood" post=153977Will the sm houses #3 and #4 be the same as the sm houses
#1 and #2? I'm assuming they are. I got on a roll making them.
https://bbquiltmaker.blogspot.com
North Alabama, USA
"I am a part of all that I have met" A. Lord Tennyson
- IP
Comment
-
Confused. Read information about the base sizes. Sure enough, even though 1” scale was accurate the base of Small House 1 was off. Reprinted at 105% which corrected the problem. Small House 2 at actual printed out the correct base measurement. Don’t both houses have to be printed at the same scale to join correctly? Doesn’t this make them larger? Grateful for any clarification.
- IP
Comment
-
Originally posted by "owasyleczko" post=153996Confused. Read information about the base sizes. Sure enough, even though 1” scale was accurate the base of Small House 1 was off. Reprinted at 105% which corrected the problem. Small House 2 at actual printed out the correct base measurement. Don’t both houses have to be printed at the same scale to join correctly? Doesn’t this make them larger? Grateful for any clarification.
- IP
Comment
-
Thank you Helen. Did as you suggested and taped house patterns together, they aligned. Checked further in Forum messages and should have checked Barbara’s excellent link showing how her house patterns measured. I was basing my concern on a Forum member’s reply saying the height of House 1 base should be 4 5/16ths. If I am viewing Barbara’s photo correctly House 1 base is 4 1/8th which is 4 2/16ths. Breathing a sigh of relief as fudging is not my strong suit!
- IP
Comment
-
Fanplus, yes you can cut the greens for houses. The only fabrics not to cut are the charcoal and cream—they are for the Roads.
Read my blog for this kind of information each month:
https://bbquiltmaker.blogspot.com/2021/01/color-my-world-month-1.html
https://bbquiltmaker.blogspot.com
North Alabama, USA
"I am a part of all that I have met" A. Lord Tennyson
- IP
Comment
-
Hi Everyone, I'm trying to post this where the most people will see this so I hope this is the right spot. I have an Epson 4760 printer. I have never had a problem printing out patterns and getting the scale right until today. Here I am, happily printing out a few things and something told me to check my scale settings. I have always had to use 103% to get the exact 1" box. Today, I checked and I had to alter my scale to 101%. Luckily my gut instinct piped up and said "hum, why not check just to be sure." Not that anyone else will have this difference but better safe than sorry. CHECK THE BOX EVERY TIME.
- IP
Comment
-
Originally posted by "cindybug0419" post=154153Hi Everyone, I'm trying to post this where the most people will see this so I hope this is the right spot. I have an Epson 4760 printer. I have never had a problem printing out patterns and getting the scale right until today. Here I am, happily printing out a few things and something told me to check my scale settings. I have always had to use 103% to get the exact 1" box. Today, I checked and I had to alter my scale to 101%. Luckily my gut instinct piped up and said "hum, why not check just to be sure." Not that anyone else will have this difference but better safe than sorry. CHECK THE BOX EVERY TIME.
- IP
Comment
-
Barbara, I am wondering why the differentiation between
the last piece of sewn fabric on house 1 and house 2. One overlaps to the left, and one overlaps to the right. I am wondering if it makes a difference later on. Otherwise, it seems they could all overlap the same direction, just to avoid a tiny bit of difficulty I had in the beginning before I caught on. My curiosity is getting the better of me. Thank you!
- IP
Comment
-
Hello to all out there!
I work with an Elna 720 Pro and finnaly figured out how to use the edge foot
First I had to change to my general plate, it does not work with my single whole plate.
My edge foot I called G (Foto attached)
And on stitch 001 I had to adjust position from 3,5 to 3,1 (Foto attached)
So, all of us who don't have Bernina machines can find a solution as well
Happy sewing
- IP
Comment
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2214 users online. 220 members and 1994 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,407
Members: 26577
Active Members: 1,813
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment