Announcement
Collapse
No announcement yet.
Latest Forum Posts
Collapse
-
Barbara, I was wondering if you would be willing to post your block photos for the month each month as we get started....
-
Beautiful!
-
Homeward bound. The long journey finally done...
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
-
It is an EQ project file so only those with Electric Quilt software could open it. I don’t have the file, just the image....
-
Hi -- is there any way to upload the entire quilt diagram to EQ8 for coloring? This would sure be helpful!
Thanks... -
My additions are all at least 10 years old. I used the floral border fabric as a guide to select a few darker fabrics that...
-
Hi Barbara...I would like to add fabrics as you did to the spring kit. Would you mind sharing which fabrics you added?...
-
Lynn’s instructions are for pieces cut oversize for Flying Geese units so the die cut measurements will most likely not...
- Loading...
- No more items.
Trending Forum Posts
Collapse
-
Home from the Maine Quilts show where my Color my World quilt, rename ‘Home,’ received 3 ribbons. I’m overwhelmed...
-
Well, here it is, the end of 2022, and I finally have finished my 2021 BOM quilt! I apologize that the photo is not centered....
-
Hi There,
I hope you can help me. I know I'm very late in getting to this point but life is finally allowing... -
I'm quite behind on my BOM, but now have all the tall buildings of the outer ring done. I would like to add some house...
-
Hi all.. I am behind in my Color My World and just starting the skyscrapers... Does anyone have the finished size (with...
-
My quilt is finish
-
For anyone paper piecing, is your quarter inch a tiny bit larger? When I’m trimming up the finished building, I line...
-
I decided early to do paper piecing instead of the wax…I’m more comfortable . However, I have a few questions…anyone...
-
Will we have access to the Color My World videos after December 31st? I can't seem to find info on this.
-
I am BRAND NEW to the Quilt Show and fell in love with this pattern. I downloaded all of the instructions. My concern is......
-
I'm a new-ish star member and would like to download the "Color My World" pattern...but I can't find where to...
-
See how I quilted Color My World and the added surprise quilting in Wendy’s border:
https://bbquiltmaker.b... -
Hello - I know someone has solved this problem...I seem to remember a question arising when we put the inner circle together...
-
Cap'n John showed me a new feature--you can see all the photos posted on any particular topic--at once.
Open... -
I know Barbara has reminded us to download all files prior to the end of the year. I finished my downloads today and decided...
-
Please use this topic to share your FINISHED top or quilt here. This will make it easy to see all the great quilts everyone...
-
Sunday Sew and Sews met today. Pam R. came up with a brilliant way to make One World—she used striped fabric!...
- Loading...
- No more items.
Mariners Compass
Collapse
X
-
-
-
-
Filter
-
Administrative
new posts
-
Happycamperx, both my Month 2 blog, released January 25, and the video on Making the Mariners Compass, available with the pattern, clearly say this is a 14” finished Compass. And the cover of the Month 2 pattern shows it is a 14” finished Compass.
I posted this on the Forum January 25 to let everyone know Month 2 was up and How To Be Successful:
https://thequiltshow.com/forum/bom-2021-color-my-world/9473-month-2-mariner-s-compass-is-up#154050
The blogs and videos are intended to supplement the pattern written by Wendy Williams. They provide a lot of additional information. That is all I can do to help everyone be successful.
The 1” scale box is crucial for paper piecing.
https://bbquiltmaker.blogspot.com
North Alabama, USA
"I am a part of all that I have met" A. Lord Tennyson
- IP
-
I did watch the video and read the info. Is my problem I did foundation paper piecing instead of the freezer paper method? My mariners circle was 13 rather then 14 and I need to figure out why before I try to redo. My square measured an inch as it was stated. I am frustrated and don’t know what I did wrong.
- IP
Comment
-
Happycamperx, either paper foundation method will work. Measure the paper wedges when you print them again to be sure the longest point, F, is 7” finished. Then if you sew the wedges together with an accurate 1/4” seam the compass will be 14” finished. Check after each seam to be sure your seam allowance is accurate.
https://bbquiltmaker.blogspot.com
North Alabama, USA
"I am a part of all that I have met" A. Lord Tennyson
- IP
Comment
-
Originally posted by "happycamperx" post=154182I grabbed mine from the garbage can to check it. My F finished is 6 1/2. My seams do look accurate. Frustrating. They are attached front and back.
into the seam allowance that means the tips of the points will be cut off when you sew the compass to the road section. HelenW
My guess is that your bottom piece is shifting while you sew. Make sure your match point are pinned or dab of glue.
- IP
Comment
-
Originally posted by "happycamperx" post=154182I grabbed mine from the garbage can to check it. My F finished is 6 1/2. My seams do look accurate. Frustrating. They are attached front and back.
https://bbquiltmaker.blogspot.com
North Alabama, USA
"I am a part of all that I have met" A. Lord Tennyson
- IP
Comment
-
Happycamper, Sorry to hear you are struggling with this project. I cannot provide you with any help, as I’m a newbie, but wanted to pass along the finished size of the compass is shown on the cover of the instructions and is 14”. Hang in here.
[/quote]
VERY IMPORTANT TO REMEMBER this note from Barbara's blog:
14. The finished size of this Mariner's Compass is 14". That means the Compass with seam allowances should measure 14.5" now.
- IP
Comment
-
Originally posted by "happycamperx" post=154179I did watch the video and read the info. Is my problem I did foundation paper piecing instead of the freezer paper method? My mariners circle was 13 rather then 14 and I need to figure out why before I try to redo. My square measured an inch as it was stated. I am frustrated and don’t know what I did wrong.
- IP
Comment
-
Thank you for all of your help. Before I go any farther I am thinking I should measure my houses to make sure they are the right size, as I did those the same way. Where is the finished size of house 1 and 2 posted? I have looked and I am not finding it.
Also from reading all of your comments, are you saying I should rip out wedges of what I have, take the paper off and resew? Or would it be better to start over?
- IP
Comment
-
Originally posted by "happycamperx" post=154210Thank you for all of your help. Before I go any farther I am thinking I should measure my houses to make sure they are the right size, as I did those the same way. Where is the finished size of house 1 and 2 posted? I have looked and I am not finding it.
Also from reading all of your comments, are you saying I should rip out wedges of what I have, take the paper off and resew? Or would it be better to start over?
that all the ripping might cause bias edges to stretch out of shape. That is not going to fix the fact the circle will be too small even if you get it perfect. I think I would just
start over. HelenW
- IP
Comment
-
I understand the finished block should be 14.5 inches, mine has finished closer to 15". I checked my templates and appear to be printed correctly using the 1" scale block, my seems are 1/4" but maybe to scant, so should I start again or will I be able to use this one? I am worried this will mess up the next step, and if I make another from start will I end up short of fabric?
- IP
Comment
-
Originally posted by "happycamperx" post=154210Thank you for all of your help. Before I go any farther I am thinking I should measure my houses to make sure they are the right size, as I did those the same way. Where is the finished size of house 1 and 2 posted? I have looked and I am not finding it.
Also from reading all of your comments, are you saying I should rip out wedges of what I have, take the paper off and resew? Or would it be better to start over?
https://thequiltshow.com/forum/bom-2021-color-my-world/9465-printing-problems#153942
The small houses should be close to 10.875"--11" tall, in the center, from raw edge to raw edge.
You need to start over with patterns that are the correct size. You said F measured 6.5", giving you a 13" finished compass.
https://bbquiltmaker.blogspot.com
North Alabama, USA
"I am a part of all that I have met" A. Lord Tennyson
- IP
Comment
-
Barbara, I was wondering if you would be willing to post your block photos for the month each month as we get started....
-
Beautiful!
-
Homeward bound. The long journey finally done...
-
Yea, that will work fine. The 60 wt has a cotton wrap around the polyester core so it is slightly thicker than the 80 wt....
-
I ordered the 60 wt thread however the 80 wt is not available. Would it be ok to use the 60 wt in the bobbin. I am on the...
-
Here is information on how to post photos on the Forum. If you have trouble it is usually because the images are too large....
-
Please use this TOPIC to share your progress with Laurel Ridge.
There is a STICKY TOPIC that explains how to... -
Please use this TOPIC to ask questions about Month 1. Month 1 will be released December 29 when the show featuring Lynn...
-
Very good info. i just watched a video for this and will buy a Wing Clipper 2 tomorrow to test. Looks like it works in a...
-
Flying geese ruler - Deb Tucker’s Wing Clipper II ruler has 1 1/4” X 2 1/2” size neede for BOM.
-
Yes, the top side you will be able to trim with that ruler. The other 3 sides you will use a square. I will demo on the...
-
Good morning from Montana Barbara, I have the flying geese 1 1/2 x 3. Do you think I would be able to trim from that to...
-
A great way to start this upcoming new year and new quilt project is to start a small group to meet regularly, in person...
- Loading...
- No more items.
What's Going On
Collapse
There are currently 2385 users online. 406 members and 1979 guests.
Most users ever online was 20,162 at 03:06 PM on 02-20-2024.
Forum Stats
Collapse
Topics: 8,272
Posts: 155,410
Members: 26584
Active Members: 1,827
Welcome to our newest member, [email protected].
Latest Topics
Collapse
Trending
Collapse
There are no results that meet this criteria.
Working...
X
Comment