Printing from phone

[Bobbie S.]

Just an fyi to be careful and make sure your pattern is correct size.
I printed the pattern today from my phone and it was slightly smaller than an inch. I went to my desktop and printed with no problem.
Just make sure to double check.

[Barbara B.]

Just an fyi to be careful and make sure your pattern is correct size.
I printed the pattern today from my phone and it was slightly smaller than an inch. I went to my desktop and printed with no problem.
Just make sure to double check.

THANK YOU for this important reminder! iPad/tablets have the same issue. Be certain the 1” scale box is correct before beginning.

[penny52]

I’ve tried all suggestions to print an accurate 1” and am still unsuccessful. My square is about 1/16th of an inch short. If I’m careful to sew my seam allowance the same 1/16th short, will I be ok?

[Barbara B.]

I’ve tried all suggestions to print an accurate 1” and am still unsuccessful. My square is about 1/16th of an inch short. If I’m careful to sew my seam allowance the same 1/16th short, will I be ok?

No, everything will be too small. Printing from a phone is not usually accurate. Same with tablets.

There are lots of posts here about printing problems. Someone found there is an Ipad app for HP printers that allows you to set the print size to Actual--the app is called HP Smart.

A workaround is to ask a friend to print your two pattern pages this month on a computer. Next month there is only 1 pattern page.