Month 2 Correction Block 5

[Barbara B.]

Block 5, the Square in a Square in a Square, needs a size correction:

Step 2, Unit B, will be 4.75" unfinished, not 4.5". Cut C squares 3" or larger for those half-square triangles.

I didn't catch this because I paper pieced these blocks so just cut everything bigger.

IF YOU ALREADY TRIMMED Unit B to 4.5", simply cut the D squares 4-4.5", add them and trim the finished block to 6.5". Your center square will "float" just a bit, no problem.

[Barbara B.]

I have already cut the fabric but not sewn it together yet. Should I recut?

[Barbara B.]

You can try using a narrow seam allowance first. If your block is 6.5" unfinished, you're fine. OR just recut the last triangles as I mentioned below, to get 6.5" unfinished block.

[Lana S.]

Help! I am having a terrible time trying to get this message written. Here goes, again:

I have made Block 5 using Edyta's instructions. It didn't not come out the correct size.
I thought I would try your suggestions. I, do not, however, have the EQ software. I then
have tried to draw this block on paper. I started with a 6-1/2" square on the paper. I decided
to try and draw it working backwards. I have put dot on each line indicating the middle (which
should be 3-1/4"). When you measure from say the West line to the South line (diagonally) it
measures a lot more than 3-7/8" as indicated on the written instructions. Can you give me
a clue as to how to draw this????? My husband and I are both stymied.
Thanks so much for any suggestions you can give me!
Lana

[Barbara B.]

Draw a 6" square on paper. Working backwards is a good plan. Place the first line at 3" at the top and draw a diagonal to a 3" mark on the left side, then the 3" mark on the bottom and right sides. Keep going in from there. You need to remember you need a 1/4" seam allowance around the outside of the 6" square but the lines have to start and end at the edges of the 6" finished size of the block.

[Lana S.]

Thank you so much. My husband had thought that I should start with a 6" block and not a 6-1/2".
I'm too exhausted to try this tonight, so will give it a go tomorrow! Thank you...thank you...thank you!!!!!

[Kathleen H.]

After completing step 2, I realized that there was not way these blocks would be 6.5" unfinished. I back calculated, and came up with the same numbers. I'm going to redo mine starting with a 3 1/4" square. After adding the triangles, the next square should measure 3 7/8". This will get you to the 4 3/4" needed to finally get 6 1/2" unfinished. I wish they would realize that if you are going to change the measurement in step 2, you need to go back to step one and make the first square bigger.

[Judy S.]

Hi,

I'm an original star member and a member for 2018 and 2019.

Is anyone else having trouble downloading and saving the revised block 2.

Any suggestions?

Thanks, Judy

[Barbara B.]

Judy, I just checked on my desktop and my Ipad and had no trouble downloading Month 2 showing the revised Block 5. Are you still having trouble?

[Judy S.]

Yes I am. I get a message blue sign that says LOGOUT.

I was able to update/download every other month.

I did send a request to customer service.

I am Logged IN. Any thoughts. Thank you for your response.

Judy

[Barbara B.]

Judy, I'm sorry, I don't know what is causing that. You could try using another computer or asking a friend to use their computer, logging in as you, to see if they can download Month 2. That would at least let you know if the issue is at your computer or something else.

Customer service will also want to help you--hopefully, you'll hear from them soon--if not, please let me know here and I'll make sure they see this.