MONTH 1 Ask Questions Here

[Barbara B.]

The pattern says the extra strips are just in case you need it. Those using their own fabric may have width of fabric less than 45”

In my Blog for Month 1 I addressed this and recommended you don’t cut the extra strip unless you need it. Tips like this is the reason I write a monthly blog.

Month 2 Blog will be released January 31, the same day I am doing a LIVE broadcast for Month 2.

You are just ahead now for the next time we make these blocks, many months from now.

[Joanne S.]

Hi, I am starting the granddaughter’s version and in month one why is there a whole 4 patch strip set leftover? We are only cutting eight of each right to make 4 blue and 4 pink? Thanks

[Sharon P.]

I do prefer washing my fabrics before stitching. I decided to wash each months fabrics as I go….i hope this is a good solution.ha.

[Sharon F.]

Thanks Helen. Very helpful.

[Barbara B.]

This Sticky Topic has a direct link to it:

https://thequiltshow.com/forum/block...ge2#post901308

[Barbara B.]

Hugo’s Magic Tape. Others recommended medical tape, Invisigrip, or a few other products.

I'm looking for yardage requirements. I'm using my stash so it would be great to know if I have enough fabric for the quilt, thank you

[Kathy M.]

I purchased the Wing Clipper II ruler. What is the product you used on the bottom so it won’t slip easily?

[Kathy M.]

I tried another sample. I cut all blocks 1/8” larger. I was able to get points on the wings, however in doing so my 1-1/2” does not line up in the exact middle. If I put it in the middle the left side is not an exact 3” - about 1-1-16th of an inch short. Any suggestions? I’m determined to get this accurate!!

[Barbara B.]

I positioned each piece and pinned them in place. I stitch to the left of the marked line. I have ordered the Wing Clipper ruler to see if that will help. I also use the Acorn product to press my seams, then spray with Best Press. I will try another set to see what happens. Thank you for your quick response and good suggestions. I thought the forum would be difficult to use but it is very user friendly!!

Great, glad you are enjoying the Forum. You WILL get this and enjoy the many Flying Geese we will make this year!

[Kathy M.]

I positioned each piece and pinned them in place. I stitch to the left of the marked line. I have ordered the Wing Clipper ruler to see if that will help. I also use the Acorn product to press my seams, then spray with Best Press. I will try another set to see what happens. Thank you for your quick response and good suggestions. I thought the forum would be difficult to use but it is very user friendly!!

[Barbara B.]

Three things go into precision piecing: the cutting, the sewing and the pressing. If you cut the pieces the correct size, it is most likely the sewing—important to have the 2 small squares aligned on the larger square exactly right. Then sew a straight seam, 1/4” on either side of the line, all the way down. My guess is one square moved a bit in the sewing, making the edge not quite right. Try pinning the small squares in place before sewing.

[Kathy M.]

Here are two of the blocks. It’s the wing on the right that is not correct. I followed the directions you had on the recent video.

[Barbara B.]

It would help to see photos

[Kathy M.]

I am having a problem with my flying geese. I have followed your directions for trimming. The left side of the block is fine, but on the right side I do not have a point - the top piece off fabric is 1/8” above the corner. I know - this is hard to describe. I am starting use the 45 degree angle and all of the measurements are correct. I don’t know why it is not coming out with a point on the right side.