19
My Country House - Month 1 - 1

Available On:
January 01, 2015

DOWNLOAD
INSTRUCTIONS

Instructional Videos
Instructional
Videos

 

This month’s trees as made from bias strips, and we’ll show you a slick way to make bias stems any width you like.  We’ll also give you a tip for positioning appliqué patches without a light box or on dark fabric.

 


Comments   

#10 yakatyyak8145 2015-02-09 08:05
I had to draw one more scallop to make the roof scalloped trim long enough for the final roof edge.
#9 yakatyyak8145 2015-02-05 11:22
Why when I taped the template sheets together is the block not 18.5 inches. It is 17 inches. The roof piece doesn't have any applique so why is it bigger than the sheets when they are taped together. Something isn't right here. Is the 18.5 inch center block to be trimmed to 17? Am I to piece the house block the size of the template or the size of the cutting directions.
#8 yakatyyak8145 2015-02-05 07:45
Why is my house one inch too wide when cut per instructions. My applique trim piece is too short to be appliqued at the roof edge.
#7 helenjf 2015-02-03 06:01
Hi Tech support
I have been unable to print Jan & Feb instructions for 2015 BOM. I did successfully print the templates (p8-11) of Jan 2015, but not the instructions. Do you have a hint? I'm using Safari (Apple) and a Lexmark laser printer (shades of grey)
I can be emailed on
Thanks for your help. Helen
#6 Renata 2015-01-18 12:46
Thanks, Lynette, for your response on the fusible stabilizer for embroidery.
#5 lynettestitches 2015-01-07 16:08
I used a 1/4" finished stem for the branches of the tree and slightly wider for the trunk. Hope this helps. Lynette
#4 lynettestitches 2015-01-07 16:06
I use a fusible lightweight stabilzer on the back of most of my work. There are many brands available, my favourite is called Sheer magic by Jenny Haskins.
#3 Anntalikka 2015-01-07 12:43
What is the interfacing used on the back of the quilt fabric for stabilization?
#2 Cheryl13 2015-01-04 02:10
Hi - in the instructions on page 4 it states that Lynette uses 2 different widths of bias for the tree. Is it possible to establish the finished width of each piece she uses as I can't locate that in the instructions.
Cheers
#1 bopciaof5 2015-01-01 13:06
just tool :-) cool!

Add comment

Security code
Refresh

Have you seen the latest, greatest EverSewn Sparrow20 for $279.99?

Check out all the EverSewn Sewing Machine Models here!

 

 

Take your EverSewn Sewing Machine to class with you, as these are only 16lbs!

 

Show #1912 - Rosa Rojas 

Apliquick Rods

 

 

Apliquick - 3 Holes Microserrated Scissors

 

 

 Apliquick Egonomic Tweezers 

Watch Bernina Videos

Bernina

Innova